english / USA
Operating Instructions
Storing the Machine
During break-in period
For periods of about 3 months or
longer
A factory new machine should not be run
at high revs (full throttle off load) for the
first three tank fillings. This avoids
unnecessary high loads during the
break-in period.
:
:
:
Remove the blower tube and
nozzle.
Drain and clean the fuel tank in a
well ventilated area.
Run engine until carburetor is dry -
this helps prevent carburetor
diaphragms sticking together.
As all moving parts have to bed in during
the break-in period, the frictional
resistances in the engine are greater
during this period.
:
:
Thoroughly clean the machine - pay
special attention to the cylinder fins
and air filter.
Store the machine in a dry, high or
locked location - out of the reach of
children and other unauthorized
persons.
The engine develops its maximum
power after about 5 to 15 tank fillings.
During operation
After a long period of full-throttle
operation, allow engine to run for a while
at idle speed so that the heat in the
engine can be dissipated by flow of
cooling air. This protects engine-
mounted components (ignition,
carburetor) from thermal overload.
After finishing work
Storing for short period:
Wait for engine to cool down. To avoid
condensation, fill the fuel tank and keep
the unit in a dry place until you need it
again.
Storing for a long period:
see chapter "Storing the Machine".
BG 45
19
Categories | Blower Vacuum and Sweeper Manuals, STIHL Blower and Vacuum Manuals |
---|---|
Tags | STIHL BG 45 |
Download File |
|
Language | English, Español |
Product Brand | STIHL. Stihl Inc, USA - Corporate phone: (757) 486-9100. International Support Information: http://stihl.com Email: info@stihl.com, Blower Vacuum |
Document File Type | |
Publisher | stihl.com |
Wikipedia's Page | Stihl |
Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)