english / USA
Checking the Spark Plug
If engine is down on power, difficult
to start or runs poorly at idling speed,
first check the spark plug.
:
Remove spark plug as discribed
in chapter “Starting“
:
:
Clean dirty spark plug.
Check electrode gap (A) -
it should be 0.5mm/0.02" -
readjust if necessary.
:
Use only resistor type spark plugs
of the approved range.
1
Rectify problems which have caused
fouling of spark plug:
:
:
:
Too much oil in fuel mix.
Dirty air filter.
Unfavorable running conditions,
Wrong fuel mix (too much engine oil in
the gasoline), a dirty air filter and
e.g. operating at part load.
To reduce the risk of fire and burn
injury, use only spark plugs
Fit a new spark plug after approx. 100
operating hours
or earlier if the electrodes are badly
eroded.
unfavorable running conditions (mostly
at part throttle etc.) affect the condition of
the spark plug. These factors cause
deposits to form on the insulator nose
which may result in trouble in operation.
authorized by STIHL. Always press
spark plug boot (2) snugly onto
spark plug boot (1) of the proper
size. (Note: If boot has detachable
SAE adapter nut, it must be
attached.) A loose connection
between spark plug boot and
ignition wire connector in the boot
may create arcing that could ignite
combustible fumes and cause a fire.
18
BG 46
| Categories | Blower Vacuum and Sweeper Manuals, STIHL Blower and Vacuum Manuals |
|---|---|
| Tags | STIHL BG 46 |
| Download File |
|
| Language | English, Español |
| Product Brand | STIHL. Stihl Inc, USA - Corporate phone: (757) 486-9100. International Support Information: http://stihl.com Email: info@stihl.com, Blower Vacuum |
| Document File Type | |
| Publisher | stihl.com |
| Wikipedia's Page | Stihl |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)