English / USA
Operating Instructions
Cleaning the Air Filter
:
Fit the spark plug and reconnect the
During break-in period
spark plug boot.
A factory new machine should not be run
at high revs (full throttle off load) for the
first three tank fillings. This avoids
unnecessary high loads during the
break-in period. As all moving parts
have to bed in during the break-in
period, the frictional resistances in the
engine are greater during this period.
The engine develops its maximum
power after about 5 to 15 tank fillings.
:
:
Move the stop switch to #
Turn the choke knob to e
1
2
1
even if the engine is cold.
:
Now start the engine.
Fuel tank run until dry and then
refueled
:
Pull the starter rope several times to
prime the fuel line.
During operation
After a long period of full-throttle
operation, allow engine to run for a while
at idle speed so that the heat in the
engine can be dissipated by flow of
cooling air. This protects engine-
mounted components (ignition,
carburetor) from thermal overload.
Dirty air filters reduce engine power
increase fuel consumption and make
starting more difficult.
After finishing work
Wait for engine to cool down. Drain the
fuel tank. Store the machine in a dry
place. Check tightness of nuts and
screws (not adjusting screws) at regular
intervals and retighten as necessary.
If there is a noticeable loss of engine
power
Turn choke knob to g
:
:
Release the screws (1) and pull
off the filter cover (2).
18
BR 340, BR 380
| Categories | Blower Vacuum and Sweeper Manuals, STIHL Blower and Vacuum Manuals |
|---|---|
| Tags | STIHL BR 340, STIHL BR 380 |
| Download File |
|
| Language | English, Español |
| Product Brand | STIHL. Stihl Inc, USA - Corporate phone: (757) 486-9100. International Support Information: http://stihl.com Email: info@stihl.com, Blower Vacuum |
| Document File Type | |
| Publisher | stihl.com |
| Wikipedia's Page | Stihl |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)