English / USA
Replacing a broken rewind spring
:
:
:
Lubricate the new spring with a few
drops of non-resinous oil.
Remove the rope rotor as described
in “Replacing the starter rope”.
Remove parts of old spring.
5
4
3
:
:
Fit the pawl (5) in the rotor and slip
the washer (4) over the starter post.
:
:
Fit new spring housing – bottom
plate must face downward. Engage
outer spring loop over the lug.
Use a screwdriver or suitable pliers
to install the spring clip (3) on starter
post and over the peg on the pawl –
the spring clip must point clockwise
Refit the rope rotor.
Go to “Tensioning rewind spring”.
If the spring pops out and uncoils
during installation: Refit it in the
spring housing in the counter-
clockwise direction – start outside
and work inward.
–
see illustration.
Go to “Tensioning rewind spring”.
BR 340, BR 380
25
| Categories | Blower Vacuum and Sweeper Manuals, STIHL Blower and Vacuum Manuals |
|---|---|
| Tags | STIHL BR 340, STIHL BR 380 |
| Download File |
|
| Language | English, Español |
| Product Brand | STIHL. Stihl Inc, USA - Corporate phone: (757) 486-9100. International Support Information: http://stihl.com Email: info@stihl.com, Blower Vacuum |
| Document File Type | |
| Publisher | stihl.com |
| Wikipedia's Page | Stihl |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)