english / USA
THE USE OF THE BLOWER
Transport
Always turn off the engine before putting
down blower. When transporting your
unit in a vehicle, properly secure it to
prevent turnover, fuel spillage and
damage to the machine.
Always tighten fuel filler cap securely
after fueling.
!
!
Warning!
Warning!
Gasoline is an extremely
flammable fuel. If spilled
or ignited by a spark or
other ignition source, it
cancause fire and serious
burn injury or property
damage.
!
Warning!
Check for fuel leakage while refueling
and during operation. If fuel or oil
leakage is found, do not start or run the
engine until leak is fixed and spilled fuel
has been wiped away. Take care not to
get fuel on your clothing. If this happens,
change your clothing immediately.
Adjust carrying harness to suit your size
before starting work.
!
Warning!
To reduce the risk of serious injury from
burns, never attempt to refuel the unit
until it has been completely removed
from the operator.
Always store gasoline in a container
approved for flammable liquids.
Different models may be equipped with
different fuel caps.
Before starting work, always inspect the
rubber buffers which connect the engine
to the pack frame. If the buffers are torn
or damaged, they should be replaced by
your STIHL dealer. Failure of one or
more buffers may cause the engine or
fuel tank to hit or rub against other parts,
and may lead to serious injury from
increased vibrations or from fire as the
result of fuel leakage.
Use extreme caution when handling
gasoline or fuel mix.
Do not smoke or bring any fire or flame
near the fuel.
Cap with Grip
!
Warning!
In order to reduce the risk of fuel spillage
and fire from an improperly tightened
fuel cap, correctly position and tighten
the fuel cap in the fuel tank opening.
Fueling instructions
Fuel your machine in well-ventilated
areas, outdoors only. Always shut off the
engine and allow it to cool before
Fueling
This STIHL unit uses an oil-gasoline
mixture for fuel (see the chapter on
"Fuel" of your owner`s manual).
To do this with this STIHL
cap, raise the grip on the
refueling. Relieve fuel tank pressure by
loosening fuel cap slowly. Never remove
fuel filler cap while engine is running.
top of the cap until it is
upright at a 90° angle.
Select bare ground for fueling and move
at least 10 feet (3 m) from the fueling
spot before starting the engine. Avoid
spilling of fuel or oil. Wipe off any spilled
fuel before starting your blower and
check for leakage.
Insert the cap in the fuel
tank opening with the
triangular marks on the grip of the cap
and on the fuel tank opening lining up.
Using the grip, turn the cap firmly
clockwise as far as it will go (approx. a
quarter turn).
BR 45
5
| Categories | Blower Vacuum and Sweeper Manuals, STIHL Blower and Vacuum Manuals |
|---|---|
| Tags | STIHL BR 45 |
| Download File |
|
| Language | English |
| Product Brand | STIHL. Stihl Inc, USA - Corporate phone: (757) 486-9100. International Support Information: http://stihl.com Email: info@stihl.com, Blower Vacuum |
| Document File Type | |
| Publisher | stihl.com |
| Wikipedia's Page | Stihl |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)