english / USA
Fold the grip flush with the
top of the cap. If the grip
does not lie completely
flush with the cap and the
detent on the grip does
not fit in the
!
Warning!
!Warning!
To reduce the risk of injury from thrown
parts, check your fanwheel and fan
housing for damage (cracks, nicks,
chipping). If any damage is found, stop
using the unit and contact your STIHL
dealer for repair.
When you pull the starter grip, don`t
wrap the starter rope around your hand.
Do not allow the grip to snap back, but
guide the starter rope slowly back to
permit the rope to rewind properly.
corresponding recess in the filler neck,
the cap is not properly seated and
tightened and you must repeat the
above steps.
Failure to follow this procedure may
result in injury to hand or fingers and
may damage the starter mechanism.
–
Throttle trigger must move freely
and spring back to idle position
when released.
Screw Cap
!
–
–
Stop switch must move easily to $
Catalytic converter
Warning!
Tightness of spark plug boot - if boot
is loose, sparks may occur and
ignite the escaping fuel vapor!
!
Warning!
Unit vibrations can cause
an improperly tightened
fuel filler cap to loosen or
come off and spill
Some STIHL blower
models are equipped with
a catalytic converter,
which is designed to
reduce the exhaust
Starting
!
quantities of fuel. In order
to reduce the risk of fuel
Warning!
emissions of the engine
spillage and fire, tighten the fuel filler cap
by hand with as much force as possible.
Your blower is a one-person machine.
To reduce the risk of eye or other injury
from thrown objects, insure that by-
standers are at least 50 feet (15m) away
during use.
by a chemical process in the muffler.
Due to this process, the muffler does not
cool down as rapidly as conventional
mufflers when the engine returns to idle
or is shut off. To reduce the risk of fire
and burn injuries, the following specific
safety precautions must be observed.
Before Starting
!
Warning!
Never operate your machine if it is
damaged, improperly adjusted or not
completely and securely assembled.
You should always inspect your unit
before starting it. Make sure the unit is
properly assembled, in good operating
condition and the controls and safety
devices are working properly.
Stop the engine immediately if you are
approached.
For specific starting instructions, see the
appropriate section of your owner`s
manual. Place the machine on firm
ground or other solid surface in an open
area. Maintain good balance and secure
footing.
6
BR 45
| Categories | Blower Vacuum and Sweeper Manuals, STIHL Blower and Vacuum Manuals |
|---|---|
| Tags | STIHL BR 45 |
| Download File |
|
| Language | English |
| Product Brand | STIHL. Stihl Inc, USA - Corporate phone: (757) 486-9100. International Support Information: http://stihl.com Email: info@stihl.com, Blower Vacuum |
| Document File Type | |
| Publisher | stihl.com |
| Wikipedia's Page | Stihl |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)