English
Proper Clothing
Good footing is very
important. Wear sturdy
boots with nonslip soles.
Steel-toed safety boots
are recommended.
Warning!
Warning!
Small particles (e.g.dust) blown through
the blower tubes and nozzle can cause
a static charging of the blower tubes.
This is especially true in low humidity
and high dust conditions. In order to
reduce the risk of shock from static
charging and subsequent injury from
loss of control, your blower has features
designed to help reduce the build up of
static electricity in the blower tubes and
equalize the charge with the engine
and/or operator:
To reduce the risk of injury, the operator
should wear proper protective apparel.
Warning!
Warning!
To reduce the risk of injury when the
inhalation of dust cannot be substan-
tially controlled use an appropriate
respirator for the material being blown.
For more information see the "Working
conditions" section of these Safety
Precautions.
To reduce the risk of
injury to your eyes never
operate your power tool
unless wearing goggles
or properly fitted protec-
tive glasses with
The control handle is designed to
conduct static electricity through the
throttle cable to the engine and from the
handle through the operator to the
ground.
adequate top and side protection com-
plying with ANSI Z 87.1 (or your
applicable national standard).
THE POWER TOOL
Power tool noise may damage your
hearing. Wear sound barriers (ear plugs
or ear mufflers) to protect your hearing.
Continual and regular users should
have their hearing checked regularly.
For illustrations and definitions of the
power tool parts see the chapter on
"Parts and Controls."
STIHL offers an optional kit for use in
especially dry and dusty conditions. The
kit contains: (1) blower tubes made with
graphite to help conduct the charge back
to the control handle, and (2) a metal
ring with "wire" for insertion in the end
tube that helps reduce the buildup of
static electricity.
Warning!
Be particularly alert and cautious when
wearing hearing protection because
your ability to hear warnings (shouts,
alarms, etc.) is restricted.
Never modify this power tool in any way.
Only attachments supplied by STIHL or
expressly approved by STIHL for use
with the specific STIHL model are
authorized. Although certain unauthor-
ized attachments are useable with
STIHL power tools, their use may, in
fact, be extremely dangerous.
Clothing must be sturdy
and snug-fitting, but allow
complete freedom of
movement.
If your blower is properly assembled and
you are still experiencing static shocks,
make sure that your foot ware has
conductive soles and try operating your
unit without gloves, which may be
interfering with the conduction of the
charge.
If this tool is subjected to unusually high
loads for which it was not designed (e.g.
heavy impact or a fall), always check
that it is in good condition before
continuing work. Check in particular that
the fuel system is tight (no leaks) and
that the controls and safety devices are
working properly. Do not continue
operating this machine if it is damaged.
In case of doubt, have it checked by your
STIHL servicing dealer.
Avoid loose-fitting jack-
ets, scarfs, neckties,
jewelry, flared or cuffed
pants, unconfined long
hair or anything that
could become drawn into
the air intake. Secure hair
so it is above shoulder
level.
4
BR 500, BR 550, BR 600
Categories | Blower Vacuum and Sweeper Manuals, STIHL Blower and Vacuum Manuals |
---|---|
Tags | STIHL BR 500, STIHL BR 550, STIHL BR 600 |
Download File |
|
Language | English, EspanĚol |
Product Brand | STIHL. Stihl Inc, USA - Corporate phone: (757) 486-9100. International Support Information: http://stihl.com Email: info@stihl.com, Blower Vacuum |
Document File Type | |
Publisher | stihl.com |
Wikipedia's Page | Stihl |
Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)