English / USA
Maintenance chart
Please note that the following maintenance intervals apply for normal operating
conditions only. If your daily working time is longer than normal or cutting
conditions are difficult (hard ground, etc.), shorten the specified intervals
accordingly.
Visual inspection (condition, leaks)
X
X
X
X
Complete machine
Clean
X
Control handle
Check operation
Clean
X
X
X
X
Air filter
Replace
X
Check by servicing dealer 1)
Pick up body in fuel tank
Fuel tank
Replace by servicing dealer 1)
Clean
X
X
X
Check idle adjustment, blade must not
rotate
X
X
Carburetor
Spark plug
Readjust idle
X
Readjust electrode gap
Replace after 100 hours of operation
Visual inspection
X
X
Intake opening for cooling air
Valve clearance
Clean
X
X
Check and adjust, for the first time
after approx. 139 hours of operation
Decarbonizing after 139 hours of
operation, then every 150 hours of
operation.
Combustion Chamber
X
Inspect
X
X
Spark arresting screen* in muffler
Clean or replace
X
X
X
All accessible screws and nuts
(not adjusting screws)
Retighten
* see "Guide to Using this Manual"
1) STIHL recommends a STIHL servicing dealer
FC 100
33
| Categories | STIHL Straight Edger Manuals, Straight Edger Manuals |
|---|---|
| Tags | STIHL FC 100 |
| Download File |
|
| Language | English, EspanĚol |
| Product Brand | STIHL. Stihl Inc, USA - Corporate phone: (757) 486-9100. International Support Information: http://stihl.com Email: info@stihl.com, Edger |
| Document File Type | |
| Publisher | stihl.com |
| Wikipedia's Page | Stihl |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)