STIHL FCS Edger Owners Manual

English / USA
Mounting the Loop Handle
:
:
Fit the plain washer and retaining
ring on the screw (6).
9
8
9
8
Insert the screw in the shaft and
tighten it down firmly
(counterclockwise).
1
A
2
4
1
3
5
6
7
10
10
A loop handle (1) may already be
Mounting the Loop Handle
mounted to the basic power tool.
:
Place the clamp (5) in the loop
handle (1) and fit handle in position
on the  drive tube (6).
Position of Loop Handle
:
:
Fit the loop handle (1) on the drive
tube approx. 20 cm (8“) (A) forward
of the control handle (2).
:
:
:
Fit the clamp (7).
Line up the holes.
Make sure that any parts that are
already fitted, i.e. the sleeve (3) and
carrying ring (4), are between the
loop handle and control handle.
Fit washers (8) on the screws (9)
and insert screws through the holes.
:
Screw on the square nuts (10) as far
as stop.
16
FCS
Product Specification
CategoriesSTIHL Straight Edger Manuals, Straight Edger Manuals
Tags
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 50 pages
LanguageEnglish, Español
Product BrandSTIHL. Stihl Inc, USA - Corporate phone: (757) 486-9100. International Support Information: http://stihl.com Email: info@stihl.com, Edger
Document File TypePDF
Publisherstihl.com
Wikipedia's PageStihl
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website