English / USA
Approved Basic Power
Tools
Mounting the Attachment
Operation of STIHL power scythe
attachments is permitted only with the
following basic power tools:
STIHL FS 831), STIHL FS 851),
1)
STIHL FS 110 , STIHL FC 83,
STIHL FC 85, STIHL FC 110,
STIHL FR 85, STIHL FH 75,
STIHL HL 73, STIHL HL 75,
STIHL HL 100, STIHL KW 85
10
5
Loop-handled machines must be
equipped with a barrier bar before
using the power scythe attachment.
9
9
L
Other combinations of the
attachment andnon-approved basic
power tools are not permitted since
they may result in accidents or
serious personal injury.
Preparations
Mounting the Cutting Head
:
Loosen the clamp screws on the
basic power tool’s gearbox housing
and pull the gearbox off the drive
tube.
:
:
Loosen the clamp screws (9).
Push the gearbox (10) on to the
drive tube (5) – turn the gearbox
back and forth at the same time.
The drive shaft may slip out of the
tube in this process. If this happens,
push the drive shaft back into the
tube.
The drive shaft must not project from the
tube more than L = 0.9" (22 mm). If
necessary, apply slight pressure to the
drive shaft and rotate it slowly at the
same time until it can be pushed in to the
required length.
1)
Loop-handle and bike-handled
versions
FH
11
| Categories | Hedge Trimmer Manuals, STIHL Hedge Trimmer Manuals, Trimmer Manuals |
|---|---|
| Tags | STIHL FH |
| Download File |
|
| Language | English, Español |
| Product Brand | STIHL. Stihl Inc, USA - Corporate phone: (757) 486-9100. International Support Information: http://stihl.com Email: info@stihl.com, Tiller Cultivator |
| Document File Type | |
| Publisher | stihl.com |
| Wikipedia's Page | Stihl |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)