English / USA
Rewind Starter
Storing the Machine
Lubricating the
Gearbox
To help prolong the wear life of the
starter rope, observe the following
points:
For periods of about 3 months or longer
:
Drain and clean the fuel tank in a
well ventilated area.
1
:
:
:
:
Pull the starter rope only in the
direction specified.
:
Dispose fuel properly in accordance
with local environmental
requirements.
2
Do not pull the rope over the edge of
the guide bushing.
:
Run engine until carburetor is dry –
this helps prevent carburetor
diaphragms sticking together.
Do not pull out the rope more than
specified since it might break.
:
Check grease level regularly - about
every 25 hours of operation.
Do not let the starter grip snap back,
guide it slowly into the housing.
See also chapter “Starting /
Stopping the Engine”!
:
:
Remove, clean and inspect the
cutting tool.
:
:
Unscrew the filler plug (1).
Thoroughly clean the machine – pay
special attention to the cylinder fins
and air filter.
If no grease can be seen on the
inside of the filler plug, screw the
tube (2) of STIHL gear lubricant for
brushcutters - see “Special
Have a damaged starter rope
replaced in good time by your
servicing dealer.
:
Store the machine in a dry, high or
locked location – out of the reach of
children and other unauthorized
persons.
Accessories” - into the filler hole.
:
:
Squeeze up to 1/5 oz (5 g) grease
into the gear housing.
Do not completely fill the gear
housing with grease.
Refit the filler plug and tighten it
down firmly.
FS 55
39
| Categories | Blower Vacuum and Sweeper Manuals, STIHL Trimmer Manuals, Trimmer Manuals |
|---|---|
| Tags | STIHL FS 55 |
| Download File |
|
| Language | English, Español |
| Product Brand | STIHL. Stihl Inc, USA - Corporate phone: (757) 486-9100. International Support Information: http://stihl.com Email: info@stihl.com, Trimmer |
| Document File Type | |
| Publisher | stihl.com |
| Wikipedia's Page | Stihl |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)