English
All other mowing heads
Removing the metal cutting blade
Refer to the instructions supplied with
the mowing head.
N
N
Block the output shaft
To reduce the risk of injury, always
shut off the engine before
adjusting the mowing line by
hand.
Unscrew the mounting nut
clockwise.
N
Take the parts off the shaft – do not
remove the thrust plate (5).
9
7
Replacing nylon line or cutting
blades
6
4
8
Refer to the instructions supplied with
the mowing head.
5
Mounting Metal Cutting Blades
If you want to use a grass cutting
blade, mount the deflector for
grass cutting blades – see
"Mounting the Deflector".
N
Place the cutting attachment (4) on
the thrust plate (5).
Collar (see arrow) must engage
the mowing head's mounting hole.
Check direction of rotation of metal
cutting blade
Securing the cutting attachment
N
Fit the thrust washer (6) and rider
plate (7) on the shaft (8).
N
Block the shaft and screw the
mounting nut (9) on to the shaft
counterclockwise and tighten it
down firmly.
1
2
If the mounting nut has become
too loose, fit a new one.
Cutting edges of grass cutting blade (1)
may point in either direction.
Cutting edges of grass cutting blade (2)
must point clockwise.
Direction of rotation is indicated by
an arrow on the inside of the
deflector.
FS 56, FS 56 R, FS 56 C, FS 56 RC
23
| Categories | Blower Vacuum and Sweeper Manuals, STIHL Trimmer Manuals, Trimmer Manuals |
|---|---|
| Tags | STIHL FS 56 |
| Download File |
|
| Language | English, Español |
| Product Brand | STIHL. Stihl Inc, USA - Corporate phone: (757) 486-9100. International Support Information: http://stihl.com Email: info@stihl.com, Trimmer |
| Document File Type | |
| Publisher | stihl.com |
| Wikipedia's Page | Stihl |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)