English / USA
Mounting the Drive Tube
!
Warning!
2
1
To reduce the risk of serious injury,
never use wire or metal-reinforced line
or other material in place of the nylon
cutting lines. Pieces of wire could break
off and be thrown at high speed toward
the operator or bystanders.
STIHL Autocut 5-2 mowing head
A
Nylon cutting cord advances auto-
matically when tapped against the
ground.
!
Warning
3
Do not use with mowing line larger than
the intended diameter. With a properly
mounted guard, the built-in cutter will
automatically adjust the line to its proper
length. Overly long lines can overload
the motor, resulting in damage to the
motor and nearby parts.
A
USING THE CUTTING TOOLS
:
:
Pull the protective cap off the drive
tube.
For an illustration of the various cutting
tools and instructions on proper mount-
ing see the chapter on "Mounting the
Mowing Head" in your owner's manual.
Push the drive tube (1) into the
motor housing (2) as far as the
mark (A), turning the drive tube
back and forth at the same time.
:
Tighten down the screw (3) in the
housing.
Using the mowing heads
The STIHL Autocut mowing head
produces a clean and tidy finish. It is to
be used only on trimmers equipped with
a line-limiting blade in the deflector in
order to keep the line at the proper
length (see "Parts and Controls" chapter
of this manual).
FSE 60
15
| Categories | Blower Vacuum and Sweeper Manuals, STIHL Trimmer Manuals, Trimmer Manuals |
|---|---|
| Tags | STIHL FSE 60 |
| Download File |
|
| Language | English, Español |
| Product Brand | STIHL. Stihl Inc, USA - Corporate phone: (757) 486-9100. International Support Information: http://stihl.com Email: info@stihl.com, Trimmer |
| Document File Type | |
| Publisher | stihl.com |
| Wikipedia's Page | Stihl |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)