English / USA
Mounting the KombiTool
Adjusting Cutter Bar
135° Version
2
1
The angle of the cutter bar can be
adjusted upwards in 4 stages from 0°
(straight) to 45°, and downwards in 8
stages from 0° to 90° (right angle facing
down). There are therefore 13 possible
working positions.
2
4
4
There is also a special transport
position.
3
:
Once the end of the drive tube is
inserted beyond the slot in the
clamp (4), push it fully home as far
as stop.
Mounting
:
Engage lug (1) on drive tube in
slot (2) in the coupling sleeve and
push home the drive tube as far as
stop.
:
:
Fit the clamp screws and tighten
them down moderately.
:
:
When correctly installed, the red
line (3) (arrow point) must be flush
with the end of the coupling sleeve.
Line up the gearbox (2) on the drive
tube so that the blades are
horizontal and the machine support
on the engine points downwards.
Tighten the wing screw (4) firmly.
:
Tighten down the clamp screws
firmly.
Removing
:
Reverse the above sequence to
remove the drive tube.
14
HL-KM
| Categories | Hedge Trimmer Manuals, STIHL Hedge Trimmer Manuals, Trimmer Manuals |
|---|---|
| Tags | STIHL HL, STIHL KM |
| Download File |
|
| Language | English, Español |
| Product Brand | STIHL. Stihl Inc, USA - Corporate phone: (757) 486-9100. International Support Information: http://stihl.com Email: info@stihl.com, Trimmer |
| Document File Type | |
| Publisher | stihl.com |
| Wikipedia's Page | Stihl |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)