English / USA
Carry out the adjustment only when
the cutting blades are at a standstill
Transport Position
The gearbox becomes hot during
operation. To reduce the risk of burn
injury, do not touch the gear
housing.
–
engine at idle speed – not in the
starting throttle position.
The gearbox becomes hot during
operation. To reduce the risk of burn
injury, do not touch the gear
housing.
To avoid risk of injury, never touch
the blades while making
adjustments.
The cutter bar can be folded flat against
the drive tube and locked in position to
save space during transportation.
:
:
:
Shut off the engine.
Always shut off the engine – slide
control to STOP or stop switch to O
Fit the blade scabbard.
–
and fit the blade scabbard before
Pull back the sliding sleeve (1) and
use the lever (2) to swing the joint
upwards – in direction of drive tube
– until the cutter bar is flat against
the drive tube.
moving the cutter bar to the
transport position or from the
transport position to the normal
working position.
:
:
Pull back the sliding sleeve (1) and
use the lever (2) to adjust the joint
by one or several holes.
:
Release the sliding sleeve and
make sure the lock pin engages the
housing (3).
Release the sliding sleeve and
make sure the pin engages the
quadrant (3).
The sliding sleeve butts against the
housing when the pin is properly
engaged (after making adjustment).
The sliding sleeve butts against the
housing when the pin is properly
engaged (after making adjustment).
HL-KM
15
| Categories | Hedge Trimmer Manuals, STIHL Hedge Trimmer Manuals, Trimmer Manuals |
|---|---|
| Tags | STIHL HL, STIHL KM |
| Download File |
|
| Language | English, Español |
| Product Brand | STIHL. Stihl Inc, USA - Corporate phone: (757) 486-9100. International Support Information: http://stihl.com Email: info@stihl.com, Trimmer |
| Document File Type | |
| Publisher | stihl.com |
| Wikipedia's Page | Stihl |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)