English / USA
When engine begins to fire:
:
Move the choke lever to e and
continue cranking.
As soon as engine runs
:
Immediately blip the throttle trigger,
the slide control moves to the run
position # and the engine settles
down to idle speed.
:
Set the choke lever (4):
:
:
Put the unit on the ground. Make
sure it is secure.
For cold start to g
For warm start to e
At very low outside temperatures –
warm up the engine
Remove the blade scabbard. The
cutting blades must be clear of the
ground and not touch any other
objects.
As soon as engine runs:
–
also use this setting if the engine
has been running but is still cold.
:
:
Allow engine to run in starting
throttle position for about 10
seconds.
:
:
Make sure you have a firm footing.
Hold the unit with your left hand on
the fan housing and press it down
firmly.
Then open the throttle wide, the
slide control moves to the run
position # and the engine settles
down to idle speed.
:
:
Pull the starter rope slowly with your
right hand until you feel it engage
and then give it a brisk strong pull.
Do not pull out the starter rope all
the way – if might otherwise break.
Stopping the engine
Do not let the starter grip snap back
–
guide it slowly into the housing so
:
Press the fuel pump bulb at least
five times, even if it is already filled
with fuel.
that the starter rope can rewind
properly.
OP
ST
:
Move the slide control to 0 or STOP.
16
HS 86 R, HS 86 T
| Categories | Hedge Trimmer Manuals, STIHL Hedge Trimmer Manuals, Trimmer Manuals |
|---|---|
| Tags | STIHL HS 86 |
| Download File |
|
| Language | English, Español |
| Product Brand | STIHL. Stihl Inc, USA - Corporate phone: (757) 486-9100. International Support Information: http://stihl.com Email: info@stihl.com, Trimmer |
| Document File Type | |
| Publisher | stihl.com |
| Wikipedia's Page | Stihl |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)