English
Cleaning the Air Filter
Adjusting the Carburetor
4
The carburetor comes from the factory
with a standard setting.
If there is a noticeable loss of engine
power
This setting provides an optimumfuel-air
mixture under most operating
conditions.
3
With this carburetor it is only possible to
make corrections with the adjusting
screws within fine limits.
N
N
Reach into the recess (4) in the filter
housing and take out the felt
filter (5).
2
1
Fit a new felt filter element (5). As a
temporary measure you canknock it
out on the palm of your hand or blow
it out with compressed air. Do not
wash.
Standard Setting
N
N
N
Shut off the engine
Check chain tension
N
N
Move the choke lever (1) to<.
Turn the screw (2) in the filter
cover (3) counterclockwise until the
cover is loose.
Replace damaged parts.
Check the air filter and replace the
element if necessary.
N
Fit the felt filter (5) in the filter
housing, make sure it is properly
seated – the arrow points to the
recess.
N
Have the spark arresting screen
(not all markets) checked – see
“Inspection and Maintenance by
Dealer"
N
N
Ease the filter cover (3) over the
choke lever and lift it away.
Clean away loose dirt from around
the filter.
N
N
Move the choke lever (1) to<.
Fit the filter cover in position,
making sure the screw is square.
Tighten down the screw.
N
N
Turn the high speed screw (H)
counterclockwise as far as stop
(max. 3/4 turn possible).
Turn the low speed screw (L)
counterclockwise as far as stop
(max. 3/4 turn possible).
2
6
HT 56 C
| Categories | Stihl Tiller Cultivator Manuals, Tiller Cultivator Manuals |
|---|---|
| Tags | STIHL HT 56 C |
| Download File |
|
| Language | English, Español |
| Product Brand | STIHL. Stihl Inc, USA - Corporate phone: (757) 486-9100. International Support Information: http://stihl.com Email: info@stihl.com, Tiller Cultivator |
| Document File Type | |
| Publisher | stihl.com |
| Wikipedia's Page | Stihl |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)