English / USA
Preparations
Mounting the Deflector
:
Loosen the gearbox clamp screws
on the basic power tool and pull the
gearbox off the drive tube.
The drive shaft may slip out of the
tube in this process. If this happens,
push the drive shaft back into the
tube.
:
:
Apply a mark at distance A (5 in/
125 mm) from the end of the drive
L
tube.
Remove the protective caps from
the ends of the drive tube and keep
them in a safe place.
:
:
Loosen the clamp screws (1).
The drive shaft must not project
Push the deflector (2) onto the drive
from the tube more than distance L
tube (3) and beyond the mark
(1
in/25 mm).
(
arrow).
If this distance is exceeded:
Apply slight pressure to the drive
shaft and rotate it slowly at the same
time until it can be pushed in to the
required length.
:
:
Pull the deflector (3) back until the
front end of its clamp is flush with or
just covers the mark (arrow).
Line up the deflector so that it is
horizontal when the machine
support on the powerhead points
down.
:
:
Tighten down the clamp screws (1)
firmly.
It must not be possible to rotate the
deflector on the drive tube.
14
KB, KW
| Categories | Stihl Tiller Cultivator Manuals, Tiller Cultivator Manuals |
|---|---|
| Tags | STIHL KB, STIHL KW |
| Download File |
|
| Language | English, EspanĚol |
| Product Brand | STIHL. Stihl Inc, USA - Corporate phone: (757) 486-9100. International Support Information: http://stihl.com Email: info@stihl.com, Tiller Cultivator |
| Document File Type | |
| Publisher | stihl.com |
| Wikipedia's Page | Stihl |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)