English / USA
Mounting the Loop Handle*
Mounting the Gearbox
Aligning the Gearbox
:
Remove both sweeping
attachments – see “Replacing the
Sweeping Attachments”.
A
2
4
1
3
:
Push the sleeve (4) onto the drive
tube (3) as far as stop.
Position of Loop Handle
:
:
Line up the gearbox on the drive
shaft so that the distance between
the horizontal axles (7) and the
deflector is the same at both sides.
:
Fit the loop handle (1) on the drive
tube approx. 8“ / (20 cm) (A)
forward of the control handle (2).
:
Make sure that any parts that are
already fitted, ie. the spacer sleeve*
(3) and carrying eye* (4), are
between the loop handle and
control handle.
Tighten down the clamp screws
firmly.
It must not be possible to rotate the
gearbox on the drive tube.
:
:
Loosen the clamp screws (5).
Push the gearbox (6) onto the drive
tube (3) and engage it by turning it
back and forth.
:
Mount the two sweeping
attachments – see chapter on
“Replacing the Sweeping
Attachments”.
*
see “Guide to Using this Manual”
KB, KW
15
| Categories | Stihl Tiller Cultivator Manuals, Tiller Cultivator Manuals |
|---|---|
| Tags | STIHL KB, STIHL KW |
| Download File |
|
| Language | English, Español |
| Product Brand | STIHL. Stihl Inc, USA - Corporate phone: (757) 486-9100. International Support Information: http://stihl.com Email: info@stihl.com, Tiller Cultivator |
| Document File Type | |
| Publisher | stihl.com |
| Wikipedia's Page | Stihl |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)