English
As soon as the engine runs
Engine does not start in warm start
position<
Operating Instructions
N
Move the choke lever tog and
continue cranking until the engine
runs.
During break-in period
If the engine does not start
A factory new machine should not be run
at high revs (full throttle off load) for the
first three tank fillings. This avoids
unnecessary high loads during the
break-in period. As all moving parts
have to bed in during the break-in
period, the frictional resistances in the
engine are greater during this period.
The engine develops its maximum
power after about 5 to 15 tank fillings.
N
N
Check that all settings are correct.
Check that there is fuel in the tank
and refuel if necessary.
N
Press down the interlock lever and
open the throttle – the choke lever
moves to the run positionF . After a
cold start, warm up the engine by
opening the throttle several times.
N
Check that spark plug boot is
properly connected.
N
Repeat the starting procedure.
Fuel tank run until dry
Make sure the carburetor is
correctly adjusted. The working
tool must not rotate when the
engine is idling.
N
After refueling, press the fuel pump
bulb at least five times – even if the
bulb is filled with fuel.
During operation
N
N
Set the choke lever to suit the
engine temperature.
After a long period of full-throttle
operation, allow engine to run for a while
at idle speed so that the heat in the
engine can be dissipated by flow of
cooling air. This protects engine-
mounted components (ignition,
Your machine is now ready for
operation.
Now start the engine.
Stopping the Engine.
carburetor) from thermal overload.
N
Move the momentary stop switch in
the direction of 0 – the engine
stops – release the momentary stop
switch – it springs back to the run
position.
After finishing work
Wait for engine to cool down. Drain the
fuel tank. Store the machine in a dry
place. Check tightness of nuts and
screws (not adjusting screws) at regular
intervals and retighten as necessary.
Other hints on starting
Engine stalls in cold start positiong
or under acceleration
N
Move the choke lever to< and
continue cranking until the engine
runs.
1
6
KM 56, KM 56 R, KM 56 C, KM 56 RC
| Categories | Multi-Task Kombi Equipment Manuals, Stihl Kombi Equipment Manuals |
|---|---|
| Tags | STIHL KM 56 |
| Download File |
|
| Language | English, Español |
| Product Brand | STIHL. Stihl Inc, USA - Corporate phone: (757) 486-9100. International Support Information: http://stihl.com Email: info@stihl.com, Blower Vacuum |
| Document File Type | |
| Publisher | stihl.com |
| Wikipedia's Page | Stihl |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)