English
Fold the grip flush with
the top of the cap. If the
grip does not lie com-
pletely flush with the cap
and the detent on the grip
does not fit in the corre-
sponding recess in the
filler neck, the cap is not
properly seated and tight-
ened and you must
Warning!
Warning!
Check for fuel leakage while refueling
and during operation. If fuel leakage is
found, do not start or run the engine
until the leak is fixed and any spilled
fuel has been wiped away. Take care
not to get fuel on your clothing. If this
happens, change your clothing
immediately.
Check that the spark plug boot is
securely mounted on the spark plug – a
loose boot may cause arcing that could
ignite combustible fumes and cause a
fire.
Keep the handles clean and dry at all
times; it is particularly important to keep
them free of moisture, pitch, oil, grease
or resin in order for you to maintain a firm
grip and properly control your power
tool.
repeat the above steps.
Different models may be equipped with
different fuel caps.
Screw Cap
Unit vibrations can cause
an improperly tightened
fuel filler cap to loosen or
come off and spill quanti-
ties of fuel. In order to
reduce the risk of fuel
spillage and fire, tighten
the fuel filler cap by hand
as securely as possible.
Cap with grip
Starting
Warning!
In order to reduce the risk of fuel spill-
age and fire from an improperly
tightened fuel cap, correctly position
and tighten the fuel cap in the fuel tank
opening.
Warning!
Start the engine at least 10 feet
(3 meters) from the fueling spot, out-
doors only.
For specific starting instructions, see the
appropriate section of your
Before Starting
To do this with this STIHL
cap, raise the grip on the
top of the cap until it is
upright at a 90° angle.
Insert the cap in the fuel
tank opening with the tri-
angular marks on the grip
of the cap and on the fuel
tank opening lining up.
Using the grip, turn the
cap firmly clockwise as
far as it will go (approx. a
quarter turn).
KombiEngine and KombiTool manuals.
Place the power tool on firm ground or
other solid surface in an open area.
Maintain good balance and secure
footing.
Warning!
Always check your power tool for
proper condition and operation before
starting, particularly the throttle trigger,
throttle trigger interlock, momentary
stop switch, cutting attachment, deflec-
tor and harness. The throttle trigger
must move freely and always spring
back to the idle position. Never attempt
to modify the controls or safety devices.
Never use a power tool that is damaged
or not properly maintained.
Warning!
To reduce the risk of injury from loss of
control, be absolutely sure that the
working tool is clear of you and all other
obstructions and objects, including the
ground, because when the engine
starts at starting-throttle, engine speed
will be fast enough for the clutch to
engage and move the working tool.
Warning!
Never use a power tool that is damaged
or not properly maintained.
KM 56, KM 56 R, KM 56 C, KM 56 RC
5
| Categories | Multi-Task Kombi Equipment Manuals, Stihl Kombi Equipment Manuals |
|---|---|
| Tags | STIHL KM 56 |
| Download File |
|
| Language | English, Español |
| Product Brand | STIHL. Stihl Inc, USA - Corporate phone: (757) 486-9100. International Support Information: http://stihl.com Email: info@stihl.com, Blower Vacuum |
| Document File Type | |
| Publisher | stihl.com |
| Wikipedia's Page | Stihl |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)