English / USA
Replacing Starter Rope
and Rewind Spring
Replacing Starter rope
1
1
1
1
:
:
Coat rope rotor bearing bore with
non-resinous oil.
Slip rotor over starter post – turn it
back and forth to engage anchor
loop of rewind spring.
:
:
Remove the screws (1).
Ease fan housing away from
crankcase and remove it sideways.
:
:
Refit the pawl (4) in the rotor.
Fit the washer (3) on the starter
2 3
post.
:
Use screwdriver or suitable pliers to
install spring clip (2) on starter post
and engage it on the pawl's peg –
the spring clip must point clockwise
4
Ease the cap (5) out of the starter
:
:
grip.
Remove remaining rope from the
rotor and grip – make sure the
sleeve is not pushed out of the grip.
–
see illustration.
:
Tie a simple overhand knot in the
new rope and then thread it through
the top of the grip and the rope
bush (6).
:
:
Use screwdriver or suitable pliers to
carefully remove spring clip (2) from
the starter post.
Carefully remove the rope rotor with
:
:
Refit the cap in the grip.
washer (3) and pawl (4).
Thread the rope through the rotor
and secure it with a simple
overhand knot.
The rewind spring may pop out and
uncoil during this operation.
44
MS 200
Categories | Chainsaw Manuals, STIHL Chainsaw Manuals |
---|---|
Tags | STIHL MS 200 |
Download File |
|
Language | English, Español |
Product Brand | STIHL. Stihl Inc, USA - Corporate phone: (757) 486-9100. International Support Information: http://stihl.com Email: info@stihl.com, Chainsaw |
Document File Type | |
Publisher | stihl.com |
Wikipedia's Page | Stihl |
Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)