English / USA
Oil Quantity
Control *
Taking Care of Guide Bar
After long period of full-throttle
operation
Allow engine to run for a short while at
idle speed so that engine heat can be
dissipated by flow of cooling air. This
protects engine-mounted components
(ignition, carburetor) from thermal
overload.
2
1
After finishing work
Different quantities of oil are required for
different bar lengths, types of wood and
cutting techniques.
3
:
Slacken off the chain if you have
retensioned it at operating
temperature during cutting work.
:
Use the adjusting screw (1) (on
underside of machine) to vary the
oil feed rate as required.
The chain contracts as it cools
down. If it is not slackened off, it
could damage the crankshaft and
bearings.
:
E = Ematic position, medium oil flow
rate - turn adjusting screw to "E"
(Ematic position)
1
3
Storing your saw for a short period:
Wait for engine to cool down. To avoid
condensation, fill the fuel tank and keep
the machine in a dry place, well away
from sources of ignition, until you need it
again.
:
:
To increase oil feed – turn adjusting
screw clockwise.
:
Turn the bar over –
every time you sharpen the chain
and every time you replace the
chain – this helps avoid one-sided
wear, especially at the nose and
underside of the bar.
To reduce oil feed – turn adjusting
screw counter-clockwise.
Your chain must always be wetted
with a film of lubricant.
Storing for a long period:
:
:
Regularly clean
See “Storing the Unit”!
the oil inlet hole (1),
the oilway (2) and
the bar groove (3).
Measure groove depth –
with scale on filing gauge* – in area
used most for cutting.
*
Special accessory
*
see “Guide to Using this Manual”
MS 341, MS 361, MS 361 C
42
| Categories | Chainsaw Manuals, STIHL Chainsaw Manuals |
|---|---|
| Tags | STIHL MS 341, STIHL MS 361 |
| Download File |
|
| Language | English, Español |
| Product Brand | STIHL. Stihl Inc, USA - Corporate phone: (757) 486-9100. International Support Information: http://stihl.com Email: info@stihl.com, Chainsaw |
| Document File Type | |
| Publisher | stihl.com |
| Wikipedia's Page | Stihl |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)