English
At very low outside temperatures
N
Set Master Control lever to the
starting throttle position (n) – even
if the engine is cold.
Operating Instructions
N
N
Allow engine to warm up at part
throttle.
N
N
Press in button to open the
decompression valve.
During break-in period
Change over to winter operation if
necessary – see “Winter
Operation”.
Now start the engine.
A factory new machine should not be run
at high revs (full throttle off load) for the
first three tank fillings. This avoids
unnecessary high loads during the
break-in period. As all moving parts
have to bed in during the break-in
period, the frictional resistances in the
engine are greater during this period.
The engine develops its maximum
power after about 5 to 15 tank fillings.
Stopping the engine
N
Move the Master Control lever to
stop position (0)
If you have moved the Master Control
lever from the starting throttle
position (n) to the stop position (0) –
press down the trigger interlock and
squeeze the throttle trigger at the same
time.
Do not make the mixture leaner to
achieve an apparent increase in
power – this could damage the
engine – see "Adjusting the
Carburetor".
If the engine does not start
Always disengage chain brake
before accelerating the engine.
Running the engine at high revs
with the chain brake engaged
(chain locked) will quickly damage
the engine and chain drive (clutch,
chain brake).
If you did not move the Master Control
lever from the choke shutter closed
position (l) to the starting throttle
position (n) quickly enough, the engine
may be flooded.
N
Move the Master Control lever to
stop position (0)
During Operation
N
Remove the spark plug – see
"Spark Plug".
Check chain tension frequently
N
N
Dry the spark plug.
A new chain has to be retensioned more
often than one that has been in use for
some time.
Crank the engine several times with
the starter to clear the combustion
chamber.
N
Refit the spark plug – see "Spark
Plug".
MS 362 C
35
| Categories | Chainsaw Manuals, STIHL Chainsaw Manuals |
|---|---|
| Tags | STIHL MS 362 |
| Download File |
|
| Language | English, Español |
| Product Brand | STIHL. Stihl Inc, USA - Corporate phone: (757) 486-9100. International Support Information: http://stihl.com Email: info@stihl.com, Chainsaw |
| Document File Type | |
| Publisher | stihl.com |
| Wikipedia's Page | Stihl |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)