English
Definitions
11 Bumper Spike.
22 Throttle Trigger Lockout.
Toothed stop for holding saw steady
against wood.
Must be depressed before the
throttle trigger can be activated.
Engages and disengages the
secondary braking system.
1
2
3
Shroud Lock.
Lock for the shroud.
12 Guide Bar.
Supports and guides the saw chain.
Carburetor Adjusting Screws.
23
24
Rear Handle.
For fine tuning the carburetor.
13 Oilomatic Saw Chain.
The support handle for the right
hand, located at or toward the rear
of the saw.
A loop consisting of cutters, tie
straps and drive links.
Spark Plug Boot.
Connects the spark plug with the
ignition wire.
14 Oil Filler Cap.
Rear Hand Guard.
For closing the oil tank.
4
5
Shutter.
Gives added protection to
operator's right hand.
With summer and winter positions.
Carburetor is heated in winter
position.
15 Muffler.
Reduces engine exhaust noise and
directs the exhaust gases.
Guide Bar Nose.
The exposed end of the guide bar.
(not illustrated, see chapter
"Tensioning the Saw Chain")
Decompression Valve
(autmatically resetting).
16 Front Hand Guard.
Provides protection against
projecting branches and helps
prevent left hand from touching the
chain if it slips off the handlebar. It
also serves as the lever for chain
brake activation.
Releases compression pressure to
make starting easier - when
activated.
Clutch.
Couples engine to chain sprocket
when engine is accelerated beyond
idle speed. (not illustrated)
6
7
Chain Brake.
A device to stop the rotation of the
chain if activated in a kickback
situation by the operator's hand or
by inertia.
Anti-Vibration System.
17 Front Handle.
The anti-vibration system includes a
number of anti-vibration elements
designed to reduce the
transmission of vibrations created
by the engine and cutting
Handlebar for the left hand at the
front of the saw.
Chain Sprocket.
18 Starter Grip.
The toothed wheel that drives the
saw chain.
The grip of the starter, for starting
the engine.
attachment to the operator's hands.
(not illustrated)
8
9
Chain Sprocket Cover.
19 Fuel Filler Cap.
Covers the clutch and the sprocket.
For closing the fuel tank.
Chain Catcher.
20 Master Control Lever.
Helps to reduce the risk of operator
contact by a chain if it breaks or
comes off the bar.
Lever for choke control, starting
throttle, run and stop switch
positions.
10
Chain Tensioner (lateral).
21 Throttle Trigger.
Permits precise adjustment of chain
tension.
Controls the speed of the engine.
5
2
MS 362 C
| Categories | Chainsaw Manuals, STIHL Chainsaw Manuals |
|---|---|
| Tags | STIHL MS 362 |
| Download File |
|
| Language | English, Español |
| Product Brand | STIHL. Stihl Inc, USA - Corporate phone: (757) 486-9100. International Support Information: http://stihl.com Email: info@stihl.com, Chainsaw |
| Document File Type | |
| Publisher | stihl.com |
| Wikipedia's Page | Stihl |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)