Owner’s Manual (Toro GM4100 Series Snowblower)
Set-up and Operating Instructions Continued:
•
•
Loosely mount a toggle switch in each hole
with washer and nuts supplied.
Wiring Harness Installation:
Plug (2) wire harness terminals onto toggle
switch terminals and attach decals (Item #1
figure 6 – reference figure 8 page 2-3).
Attach the wiring harness for the electric spout
control (figure 4) per illustration in section 4, page
4-7.
Loftness will provide the wiring harness (P/N
N15370) from the spout and an additional wiring
harness, purchased from Toro (Toro P/N 95-3263),
will be used to provide power from the traction
unit to the electric spout control. (disregard wiring
instructions included with Toro wiring harness kit):
•
•
•
Plug harness terminal onto traction unit
accessory wire harness connector (located at
fuse block).
Secure ring terminal wire of harness to screw
on capacitor with black wire. Capacitor is
located near fuse block.
Mounting holes may be provided for the toggle
switches. Follow the directions shown below if the
mounting holes are not in the control panel:
Affix the mounting pads to underside of
operator platform at locations shown in
figure 7. Clean surface well before affixing
pads (Item #1 figure 7).
•
Remove (4) knobs securing control panel
housing to frame control console. Remove
housing (Item #1 figure 5)
Figure 7
Figure 5
•
•
•
•
Insert a cable tie through each of the plastic
mounting pads.
•
Mark and drill (2) .50” holes in top of
control console per dimensions shown in
figure 6.
Insert end of harness through hole in
operator platform and secure with cable ties.
Plug harness connector into connector on
snowblower harness.
Install and label (1) 10 amp fuse block
breaker socket for Implement and (1) 25
amp breaker fuse block socket for Thermal.
Note: Wires must not contact any sharp edges
or moving parts.
Figure 6
N14868
2 - 2
November, 2004
| Categories | Snow Blower Manuals, Toro Snow Blower |
|---|---|
| Tags | Toro 601TR4100, Toro 661TR4100, Toro 721TR4100 |
| Download File |
|
| Document Type | Operator's Manual |
| Language | English |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Snow Blower |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)