TORO GM 345/325-D Cutting Units 33
Spindle Bearing Service
Indications of spindle bearing failure.
1.
2.
3.
4.
5.
Noisy operation.
Spindle bearing loose, making noise.
Grease leaking from seals.
Bad bearings damages seals.
Belt failures.
Pulleys misaligned because of bad bearings.
High horsepower requirements.
∑
∑
∑
∑
Spindle bearings drag.
High bearing housing heat.
∑
Bearings drag causing heat.
Cautions when rebuilding spindles.
1.
Bearings and spacers are a match set.
∑
Do not intermix new and old bearings and spacers when rebuilding spindles.
Install inside spacer and inside spacer ring on spindle shaft (No groove in shaft for inside spacer ring).
Install snap ring spacer in the groove cut in the bearing housing).
Install one race below snap ring.
∑
∑
∑
∑
install outside spacer and race above the snap ring.
2.
Fill housing with grease when assembling.
∑
Makes sure that the bearing have ample lubrication for initial operation. (Prevents low hour repeat
failures).
Seal replacement.
When replacing the spindle seals be careful to install the seals with the seal lips facing in the correct direction.
72”
Recycler Deck.
1.
2.
The upper seal lip faces inward toward the upper bearing.
The lower seal lip faces outward, away from the lower bearing.
72”
Rear Discharge & Side Discharge.
1.
2.
The upper seal lip faces outward away from the upper bearing.
The lower seal lip faces outward, away from the lower bearing.
Check spindle rotation.
∑
∑
Spindle should rotate smooth the full turn.
Should be slight drag when rotated (seal drag).
∑If spindle won’t turn, disassemble and check spacers for proper location.
NOTES
____________________________________________________________________________________________________________
____________________________________________________________________________________________________________
____________________________________________________________________________________________________________
____________________________________________________________________________________________________________
____________________________________________________________________________________________________________
____________________________________________________________________________________________________________
____________________________________________________________________________________________________________
____________________________________________________________________________________________________________
____________________________________________________________________________________________________________
____________________________________________________________________________________________________________
| Categories | Lawn Mower Manual, Toro Lawn Mower Manual |
|---|---|
| Tags | Groundsmaster 325, Groundsmaster 345 |
| Download File |
|
| Language | English |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)