SPECIFICATIONS
Groundsmaster 4000-D & 4100-D
®
Engine
Kubota
®
V2003-T, 4-cylinder, liquid-cooled, turbo-charged diesel. 122 cu. in. (2.0 liter) displacement. 60 hp (44.8 kW) gross,
58
hp (43.3 kW) net and 117 ft.-lbs. torque at governed speed of 2,600 rpm. 8 quart (7.6 liter) oil capacity.
Fuel Capacity 19 gallons (72 liters) diesel fuel.
Traction Drive Full-time, bi-directional, hydrostatic, closed-loop, 4WD transmission. Variable displacement piston pump with servo
control powers fixed displacement piston motors which drive single reduction planetary gear assemblies at each front wheel.
Parallel hydraulic flow powers fixed displacement piston motor which drives mechanical axle in rear. 2WD in forward
(transport) range.
Ground Speed 4000-D: Transport: 0-15 mph (24.2 km/h) forward, 0-9 mph (14.4 km/h) reverse. Mow: 0-8 mph (12.4 km/h) forward, 0-4
mph (6.4 km/h) reverse. 4100-D: Transport: 0-15 mph (24.2 km/h) forward, 0-8 mph (12.9 km/h) reverse. Mow: 0-8.8 mph
(14.2
km/h) forward, 0-4.8 mph (7.7 km/h) reverse.
Tires
Steering
Gauges
Front: 26 x 12-12, 6-ply tubeless Multi-Trac. Rear: 20 x 10-10, 6-ply tubeless Multi-Trac.
Power steering with dedicated power source. Steering wheel tilts to desired operator position.
Hour meter, fuel gauge, engine temperature gauge. Indicator lights for high temperature, oil pressure, alternator and glow
plugs. Audible alarm for low oil pressure and high coolant temperature.
Controls
Tilt steering, ignition switch, throttle, foot-operated traction pedal, lockable individual brake pedals, parking brake lock,
mow/transport speed selector switch, individual deck lift/lower levers, counterbalance adjustment, tow valve, cup holder,
toolbox, radio holder and 12-volt power outlet.
Warranty
Two year limited warranty. Refer to Operator’s Manual for further details.
Overall Dimensions
GM 4000-D
GM 4100-D
Height
81" (205.7 cm) w/ROPS
135" (343 cm) w/decks down
136" (345.5 cm) w/decks down
71" (180 cm) @ 2" (5 cm) HOC
55.5" (140 cm)
81" (205.7 cm) w/ROPS
144" (365.8 cm) w/decks down
127" (322.6 cm) w/decks down
71" (180 cm) @ 2" (5 cm) HOC
55.5" (140 cm)
Length
Width
Transport Width
Wheelbase
Cutting Decks
GM 4000-D, Model 30410
GM 4100-D, Model 30411
Type
Three rear discharge rotary cutting decks.
All outfront rear discharge rotary cutting deck.
Width of Cut Overall: 132" (335.3 cm), Front: 62" (157.5 cm),
Wings: 42" (106.7 cm), Overlap: 7" (12.8 cm).
Overall: 124" (315 cm), 89" (226 cm) width of cut with one
wing up. Center Deck 54" (137.2 cm) width of cut.
Mowing Rate Mows up to 10.6 acres/h (4.3 hectares/h) at 8 mph
Mows up to 9.9 acres/h (4.0 hectares/h) at 8 mph
(12.4 km/h). Assumes no overlap or stops.
(12.4
km/h). Assumes no overlap or stops.
Deck Drive Direct-mounted hydraulic motor into spindle. Remaining
Direct-mounted hydraulic motor into spindle. Remaining
spindle(s) driven by individual B-section kevlar belt. Quick- spindle(s) driven by individual B-section kevlar belt.
release belt covers.
Quick-release belt covers.
Construction
Welded steel with steel channel and plate reinforcements.
Welded steel with steel channel and plate reinforcements.
1-5" (2.54-12.7 cm) in .5" (1.27 cm) increments.
Height of Cut 1-5" (2.54-12.7 cm) in .5" (1.27 cm) increments.
Ground Following 6" anti-scalp cups on each blade, adjustable skids on
each deck, 4 anti-scalp rollers on front deck and 1 on
each wing.
6" anti-scalp cups on each blade, adjustable skids, 3 anti-scalp
rollers on front deck and 1 on each wing. Adjustable skids on
wing decks.
Protection
Bi-directional, impact absorption device on each
wing deck.
Impact absorption device on each wing deck.
Spindles
1.25" (3.17 cm) diameter spindle shafts, 9" (22.9 cm)
diameter conical ductile iron housing, and 2 greaseable
tapered roller bearings.
1.25" (3.17 cm) diameter spindle shafts, 9" (22.9 cm)
diameter conical ductile iron housing, and 2 greaseable tapered
roller bearings.
Serviceability
Front deck flips 85 degrees. Replaceable skids, baffles and
caster arms.
Center deck section flips 75 degrees. Replaceable skids, baffles
and caster arms.
Products depicted in this brochure are for demonstration purposes only.
Actual products offered for sale may vary.
©
2003 The Toro Company, 8111 Lyndale Ave. S., Bloomington, MN 55420-1196
www.toro.com
Part No. 03-043-T. Printed in U.S.A.
- 6 of 6
- « Previous
- 1
- …
- 4
- 5
- 6
Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
---|---|
Tags | Toro 4100, Toro GM4000 |
Download File |
|
Document Type | Catalog |
Language | English |
Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
Document File Type | |
Publisher | toro.com |
Wikipedia's Page | Toro Company |
Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)