Reelmaster
®
4000-D Specifications*
REELMASTER 4000-D
2WD, MODEL 03706 OR 4WD, MODEL 03707 TRACTION UNITS
Kubota
®
liquid-cooled diesel, 4-cylinder, 49 gross hp (37 kW) @ 2,800 RPM, governed to 2,300 RPM. 134 cu. in. (2,197 cm )
3
ENGINE
displacement. Pressurized lubrication system with 8.1 U.S. qt. (7.6 liter) capacity. Heavy duty three phase air cleaner. Replaceable
spin-on fuel filter/water separator with water in fuel sensor and warning.
Rear air intake with full-flow hydraulic oil cooler and agricultural type radiator with 3.7 gallons (14 liter) system capacity with 7-row
staggered tube construction. Two speed fan.
RADIATOR/OIL
Replaceable spin-on fuel filter/water separator has built-in water sensor and console warning.
Fuel capacity: 17 gallons (65 liter) diesel fuel.
FUEL SYSTEM
TIRES/WHEELS
BRAKES
Front tires: (2) 31 x 13.50-15, 4-ply high flotation. Rear tires: (2) 23 x 10.50-12, 6-ply, high flotation turf tires.
Hand operated twin disc brakes ahead of gear reductions provide positive parking and emergency braking. Dynamic braking through
closed-loop hydrostatic drive.
STEERING
Automotive type full power steering.
Forward speed of 0-12 mph (19.2 km/h) in 2WD, and 0-8.5 mph (13.7 km/h) in 4WD. Reverse speed of 0-4 mph (0-6.4 km/h).
GROUND SPEED
2WD: Closed-loop hydrostatic system driving industrial double planetary gear reduction front wheel drives.
4WD: Closed-loop hydrostatic system driving industrial double planetary gear reduction front wheel drives in parallel with two high
torque hydraulic rear wheel motors. Solenoid-operated selector valve.
TRACTION DRIVE
Foot operated: forward/reverse traction pedal and front cutting unit latch release. Adjustable traction pedal stop.
Hand operated: key ignition switch, throttle, reel speed control, cutting unit raise/lower controls, cutting unit pto lever, parking brake
lever. Hydraulic cutting unit counterbalancing control under control panel. 2WD/4WD selector switch on 4WD model only.
CONTROLS
Gauges: Fuel level and hour meter. Warning systems with light and alarm: low hydraulic oil level, hydraulic filter change required, low
voltage indicator, high reservoir oil temperature, low engine oil pressure, water in the fuel, high engine temperature (override button
allows unit to be moved short distances), and air cleaner restriction. Engine shutdown protection provided for low hydraulic oil level and
high engine temperature (with over-ride button).
GAUGES &
DIAGNOSTICS
Two piece deluxe seat with armrests, adjustable backrest angle and suspension adjustable for operator’s weight.
SEAT
Wheel Tread: 53" (134.6 cm). Overall Height: 56" (142.2 cm), 82" (208.3 cm) with ROPS. Wheel Base: 57" (144.8 cm).
Transport Width: 91.5" (232.4 cm). Overall Length: 111" (281.9 cm). Approx. Weight: 4,360 lbs. (1,979.4 kg).
OVERALL DIMENSIONS
This product complies with the American National Standards Institute (ANSI B71-4 – 1999) and European Community specifications
(CE Certified). 4-post ROPS meets OSHA and SAE certification requirements, standard on 4WD, available on 2WD models.
CERTIFICATION
WARRANTY
Two year limited warranty. Refer to the Operator’s Manual for further details.
HYDRAULIC SYSTEM
High efficiency fixed displacement pump. Filtration and cooling of the full cutting circuit flow for cool running, long life. Flow control
system maintains constant reel speed regardless of cutting load. Reel speed is adjustable to permit matching clip length to ground
speed while maintaining full engine power availability. Backlap capability. High torque toothed belt on reel drive.
CUTTING UNIT
DRIVE SYSTEM
Hydraulic lift system provides for simultaneous or independent lift control. Lift valve has automatic float position feature. Center three
cutting units operate together; two wing units operate individually. Reels automatically shut off when raised. Mechanical transport locks
may be released without leaving operator’s seat. Single acting lift cylinders with air bleed screws.
CUTTING UNIT
LIFT SYSTEM
11 gallon (42 liter) capacity with large diameter fill cap with stainless steel strainer. Sight glass level indicator. Remote-mounted 40
micron replaceable breather element. Water collector/drain fitting. 125 micron suction screen. Internal baffle system. Oil level warning
protection switch.
HYDRAULIC OIL
RESERVOIR
HYDRAULIC FITTINGS
HYDRAULIC FILTRATION
Hydraulic system utilizes O-ring face seals at all connections.
A single large spin-on hydraulic filter element. A filter change warning light is on the front console.
* Specifications and design subject to change without notice.
| Categories | Lawn Mower Manual, Toro Lawn Mower Manual |
|---|---|
| Tags | Toro Reelmaster 4000-D |
| Download File |
|
| Document Type | Specifications |
| Language | English |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)