Toro Reelmaster 4000 D Specifications 4000 D 2WD ENGINE RADIATOR OIL FUEL Specifications

Reelmaster   4000-D  Specifications*
®
REELMASTER 4000-D
2WD, MODEL 03706 OR 4WD, MODEL 03707
Kubota
®
liquid-cooled diesel, 4-cylinder, 49 gross hp (37 kW) @ 2,800 RPM, governed to 2,300 RPM  134 cu  in  (2,197 cm )
3
ENGINE
displacement  Pressurized lubrication system with 8 1 U S  qt  (7 6 liter) capacity  Heavy duty three phase air cleaner   
Replaceable spin-on fuel filter/water separator with water in fuel sensor and warning
Rear air intake with full-flow hydraulic oil cooler and agricultural type radiator with 3 7 gallons (14 liter) system capacity with  
7-row staggered tube construction  Two speed fan  
RADIATOR/OIL
Replaceable spin-on fuel filter/water separator has built-in water sensor and console warning   
Fuel capacity: 17 gallons (65 liters) diesel fuel  2008 models Biodiesel-Ready for use up to B-20 (20% biodiesel and 80% petrol blend)
FUEL SYSTEM
TIRES/WHEELS
BRAKES
Front tires: (2) 31 x 13 50-15, 4-ply high flotation  Rear tires: (2) 23 x 10 50-12, 6-ply, high flotation turf tires
Hand operated twin disc brakes ahead of gear reductions provide positive parking and emergency braking   
Dynamic braking through closed-loop hydrostatic drive
STEERING
Automotive type full power steering
GROUND SPEED
Forward speed of 0-12 mph (19 2 km/h) in 2WD, and 0-8 5 mph (13 7 km/h) in 4WD  Reverse speed of 0-4 mph (0-6 4 km/h)
2WD: Closed-loop hydrostatic system driving industrial double planetary gear reduction front wheel drives
4WD: Closed-loop hydrostatic system driving industrial double planetary gear reduction front wheel drives in parallel with two high
torque hydraulic rear wheel motors  Solenoid-operated selector valve
TRACTION DRIVE
CONTROLS
Foot operated: forward/reverse traction pedal and front cutting unit latch release  Adjustable traction pedal stop   
Hand operated: key ignition switch, throttle, reel speed control, cutting unit raise/lower controls, cutting unit pto lever, parking
brake lever  Hydraulic cutting unit counterbalancing control under control panel  2WD/4WD selector switch on 4WD model only
Gauges: Fuel level and hour meter  Warning systems with light and alarm: low hydraulic oil level, hydraulic filter change required,
low voltage indicator, high reservoir oil temperature, low engine oil pressure, water in the fuel, high engine temperature (override
button allows unit to be moved short distances), and air cleaner restriction  Engine shutdown protection provided for low hydraulic
oil level and high engine temperature (with over-ride button)
GAUGES &
DIAGNOSTICS
SEAT
Two piece deluxe seat with armrests, adjustable backrest angle and suspension adjustable for operator’s weight  
OVERALL
DIMENSIONS
Wheel Tread: 53" (134 6 cm)  Overall Height: 56" (142 2 cm), 82" (208 3 cm) with ROPS  Wheel Base: 57" (144 8 cm)   
Transport Width: 91 5" (232 4 cm)  Overall Length: 111" (281 9 cm)  Approx  Weight: 4,360 lbs  (1,979 4 kg)
This product complies with the American National Standards Institute (ANSI B71-4 – 2004) and European Community specifications
(CE Certified)  4-post ROPS meets OSHA and SAE certification requirements, standard on 4WD, available on 2WD models
CERTIFICATION
WARRANTY
Two-year limited warranty  Refer to the Operator’s Manual for further details
HYDRAULIC SYSTEM
High efficiency fixed displacement pump  Filtration and cooling of the full cutting circuit flow for cool running, long life  Flow control
system maintains constant reel speed regardless of cutting load  Reel speed is adjustable to permit matching clip length to ground
speed while maintaining full engine power availability  Backlap capability  High torque toothed belt on reel drive
CUTTING UNIT DRIVE
SYSTEM
Hydraulic lift system provides for simultaneous or independent lift control  Lift valve has automatic float position feature  Center
three cutting units operate together; two wing units operate individually  Reels automatically shut off when raised  Mechanical
transport locks may be released without leaving operator’s seat  Single acting lift cylinders with air bleed screws
CUTTING UNIT LIFT
SYSTEM
11 gallon (42 liter) capacity with large diameter fill cap with stainless steel strainer  Sight glass level indicator  Remote-mounted
40 micron replaceable breather element  Water collector/drain fitting  125 micron suction screen  Internal baffle system  Oil level
warning protection switch
HYDRAULIC OIL
RESERVOIR
HYDRAULIC FITTINGS
HYDRAULIC FILTRATION
Hydraulic system utilizes O-ring face seals at all connections
A single large spin-on hydraulic filter element  A filter change warning light is on the front console
*Specifications and design subject to change without notice
53
Product Specification
CategoriesLawn Mower Manual, Toro Lawn Mower Manual
Tags
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 2 pages
Document TypeSpecifications
LanguageEnglish
Product BrandToro. Customer Service Representatives are available by phone: Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower
Document File TypePDF
Publishertoro.com
Wikipedia's PageToro Company
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website