Reelmaster® 6500-D & 6700-D Specifications*
REELMASTER 6500-D
MODEL 03806, 2WD OR MODEL 03807, 4WD
REELMASTER 6700-D
MODEL 03808, 4WD
Kubota V1505-T liquid-cooled diesel engine. 4-cylinder, over-head valve. 1.5 liter displacement. Turbo-charged. 46 hp (34.3 kW)
®
ENGINE
gross rated, 42 hp (31.3 kW) net at 3000 rpm. 40 amp alternator. Donaldson two-stage air cleaner with safety filler and
restriction indicator.
Rear mounted, cross-flow agricultural type radiator, 7 fins per inch. Cooling system capacity is 3.5 gallons (13.25 liters). Air to oil cooler
with 2 rows, 6 fins per inch, mounted in front of radiator tips outward for cleaning. Removable oil cooler/radiator screen.
RADIATOR
12 volt, 650 cold cranking amperes at 0°F (-18°C), 105 minute reserve capacity at 80°F (27°C), maintenance free battery. 1.4 kW
electric starter. 55 amp alternator with I.C. regulator/rectifier. Automotive type electrical system. Seat switch, reel and traction interlock
switches.
ELECTRICAL
FEATURES
Bosch in-line fuel injection pump with energized-to-run (ETR) fuel flow solenoid. Replaceable spin-on fuel filter/water separator.
®
Fuel capacity: 15 gallon (57 liter).
FUEL SYSTEM
CONTROLS
Foot operated traction and brake pedals. Hand operated throttle, traction speed limiter, parking brake latch, ignition switch, single
joystick control for cutting unit on/off and lift/lower. Reel speed and backup controls located under the hood.
Hour meter, speedometer, fuel gauge, engine coolant gauge, and warning light cluster: engine oil pressure, high engine temperature,
charge indicator, glow plug, water in fuel indicator, low water indicator. Reel control lamp that lights to indicate the reels are not
providing desired clip.
GAUGES
The Automatic Control Electronics, ACE™ system allows precision timing and control of machine functions for maximum reliability.
Optional diagnostic display connects to an electronic control unit to pinpoint any electrical problems quickly and easily. Available DATA
LOG™ system allows mechanic to find intermittent problems. Diagnostic test ports are provided for front and rear cutting unit drive,
cutting unit lift, steering, and hydrostatic transmission charge pressure.
DIAGNOSTICS
Power to the front drive wheel is via servo-controlled hydrostatic pump operating individual fixed displacement axial piston wheel
motors that operate a planetary gear final drive assembly. Foot pedal control of forward/reverse ground speed.
®
Toro 4-Matic 4WD System only: couples rear drive axle to hydrostatic transmission via overrunning clutch for full time on-demand
TRACTION DRIVE
GROUND SPEED
4WD. A Roll Over Protection Structure (ROPS) and seat belt are standard on 4WD models.
0-10 mph (0-16.1 km/hr) forward; 0-4 mph (0-6.4 km/hr) reverse.
TIRES/WHEELS/
PRESSURE
Two rear steering tires: 20 x 10-10, tubeless, 6-ply rating. Two front traction drive tires: 29 x 14-15, tubeless, 6-ply rating.
Recommended tire pressure: 10-15 psi (59-103 kPa).
MAIN FRAME
BRAKES
All welded steel frame includes tie-down loops.
Wet triple disc brakes on front planetary assemblies may be actuated individually for service brakes or locked together for transport or
parking brakes. Dynamic braking through hydrostatic traction drive.
STEERING
SEAT
Power steering with dedicated power source.
Deluxe seat with adjustable suspension and fore-aft location. Optional Armrest Kit, Model 30707.
A 4-post ROPS with seat belt and optional canopy; standard on Models 03807 and 03808, optional on Model 03806.
ROPS
Height
Length
Transport Width
Operational Width
Wheel Tread
Wheelbase
Models 03806/03807:
Model 03808:
60" (152 cm) w/o ROPS
84" (213 cm) w/ ROPS
84" (213 cm) w/ ROPS
120" (305 cm)
84" (213 cm)
110" (279 cm)
72.25" (178 cm) - front
41" (104 cm) - rear
72.25 (178 cm) - front
41" (104 cm) - rear
58" (147 cm)
OVERALL
DIMENSIONS
120" (305 cm)
84" (213 cm)
147" (374 cm)
58" (147 cm)
Model 03806: 3,100 lbs. (1,407 kg) with 5-blade cutting units and full fluid levels.
Model 03807: 3,200 lbs. (1,453 kg) with 5-blade cutting units and full fluid levels.
Model 03808: 3,850 lbs. (1,748 kg) with 5-blade cutting units and full fluid levels.
NET WEIGHT WET
SOUND LEVEL
WARRANTY
82 dB(A) under normal operating conditions.
Two year limited warranty. Refer to the Operator’s Manual for further details.
The Reelmaster 6000 series complies with American National Standards Institute (ANSI B71.4-1999) and European Community (CE)
specifications with required weight kits and ballast installed.
CERTIFICATION
* Specifications and design subject to change without notice.
| Categories | Lawn Mower Manual, Toro Lawn Mower Manual |
|---|---|
| Tags | Toro Reelmaster 6500-D, Toro Reelmaster 6700-D |
| Download File |
|
| Document Type | Specifications |
| Language | English |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)