Reelmaster® 6500-D & 6700-D Specifications* (continued)
HYDRAULIC SYSTEM
PUMP A three section gear pump provides hydraulic flow to power the cutting units, power steering and cutting unit lift.
All hydraulic functions are controlled by two integrated hydraulic control blocks utilizing cartridge type relief valves, solenoid controlled
proportional valves and solenoid operated directional control valves.
CONTROL BLOCKS
REEL SPEED
CONTROL
Reel drive circuit is split into front and rear independent circuits. Each circuit has a manually adjustable control for reel speed and
backlap adjustment.
The front right and left units and the rear two units are raised by individual cylinders in separate series circuits. The front center unit
and outer rear units on Model 03802 are raised individually. All lift and lower sequences are controlled by the ECU.
LIFT CYLINDERS
HYDRAULIC OIL
RESERVOIR
100% of oil from reservoir passes through a 100 mesh suction strainer before entering the reel drive circuit. 8.5 gallon (32 liter)
capacity.
HYDRAULIC OIL
FILTER
11 gram capacity at 10 gallon (37 liter) per minute flow Average Beta = 20 at 3 micron. Filter head has integral 50 psi (3.4 bars) bypass
and a true differential pressure service indicator.
5, 7 AND 11 BLADE CUTTING UNITS
Reelmaster 6500-D
Reelmaster 6700-D
Five 22" (56 cm) width cutting units; fully interchangeable.
Front or rear discharge selectable with movable shield.
Seven 22" (56 cm) width cutting units; fully interchangeable. Front
or rear discharge selectable with movable shield.
TYPE
WIDTH OF CUT
HOC RANGE
96" (244 cm) total.
133" (338 cm) with 7 cutting units, 114.5" (291 cm) with 6 cutting
units, or 96" (244 cm) with 5 cutting units.
3
/8-13/4" (9.5-44.5 mm) height of cut range. Recommended use: 5-Blade 1-13/4" (25-44 mm); 7-Blade 1/2-1" (12-25 mm); 11-Blade 3/8-5/8"
(9.5-15 mm).
REEL CONSTRUCTION
REEL DRIVE
All welded construction. 7" (17.8 cm) diameter reels.
Reel motors feature quick disconnect for removal or installation onto cutting unit. Cutting units can be driven from either end.
Single point adjustment mechanism, .0005" (.0127 mm) adjustment per click.
BEDKNIFE/BEDBAR
CLIP FREQUENCY
.375-1.25" (9.5-31.8 mm). Reel speed is manually adjustable to maintain proper clip.
Front roller: 3" (7.6 cm) diameter Wiehle roller standard. Rear roller: 3" (7.6 cm) diameter Full roller. All rollers use the same heavy duty
ball bearings with two conventional single lip seals and Toro labyrinth seal to provide four sealing surfaces to protect the bearings.
Optional 3" (7.6 cm) diameter Full roller is available for the front position.
ROLLERS
GROOMER KIT, MODELS 03810 AND 03811
CUTTER WIDTH
20" (50.8 cm).
.188-2" (4.8-51 mm) above ground level, at mowing height-of-cut range of
(4.8 mm) below height of cut when engaged in grass; .25" (6.4 mm) above height of cut when raised out of grass.
3/ -1.75" (9.5-44 mm). Height of Groom (HOG): .188"
8
DEPTH PENETRATION
Shaft: fatigue-proof steel hexagon. Blades: heat-treated steel, .042" (1 mm) thick, 2.5" (6.4 cm) diameter, .5" (1.3 cm) spacing between
blades.
CONSTRUCTION
WEIGHT
15 lbs. (6.8 kg).
ACCESSORIES
Model No.
03860
Description
Model No.
30707
03872
Description
Armrest Kit
Part No.
94-2836
85-4750
03882
Description
Part No.
Description
5-Blade Cutting Unit
7-Blade Cutting Unit
11-Blade Cutting Unit
Rear Weight Kit
100-9920 Rear Roller Scraper Kit
100-9908-03 Front Roller Scraper Kit
03861
Thatching Reel
Hand Held Diagnostic Tool
03862
03521
TurfDefender™
Leak Detector Kit
RM 5500/6000 Basket
03876
RM 5500/6000 Powered
Rear Roller Brush
When Using Groomers
107-9518
108-6743
Grass Basket
Mounting Kit
* Specifications and design subject to change without notice. Products depicted in this literature are for demonstration purposes
only. Actual products offered for sale may vary in design, required attachments and safety features. Consult your Toro Distributor.
The Reelmaster 6500-D and 6700-D are manufactured
in Tomah, WI ISO 9002 Certified Plant.
- 2 of 2
- « Previous
- 1
- 2
| Categories | Lawn Mower Manual, Toro Lawn Mower Manual |
|---|---|
| Tags | Toro Reelmaster 6500-D, Toro Reelmaster 6700-D |
| Download File |
|
| Document Type | Specifications |
| Language | English |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)