Nozzle Installation and Removal
To install nozzle: (Refer to Figure 2A.) Pull lock pin up. Align arrow on nozzle top with slot in nozzle turret and insert
nozzle. Using a coin or Super 700 Nozzle Tool & Wrench (89-1376), press and turn nozzle clockwise until seated in
turret. Turn lock pin to align slot with “L” (lock) on nozzle top (part circle models only). Press lock pin down.
Note: On part circle models, nozzle turret may ratchet to end of arc before nozzle seats or releases.
Figure 2A
SUPER
A
700
L
ALIGN ARROW
WITH SLOT
TORO700
SUPER
TORO
To remove nozzle: (Refer to Figure 2B.) Turn lock pin to align slot with “L” (lock) on nozzle top (part circle
models only). Pull lock pin up. Insert a coin or Super 700 Nozzle Tool & Wrench (89-1376) into slot on top of noz-
zle. Turn nozzle counterclockwise to release. Lift nozzle out of nozzle turret.
Figure 2B
SUPER
A
700
L
700
SUPER
Part Circle Arc Adjustment
The S700 part circle sprinkler arc is adjustable from 40° – 330°. The left reversing point, located at the end
of counterclockwise nozzle travel, is stationary or “fixed” and is not adjustable. Therefore, the left end of the
arc must be aligned with the left watering border by turning the sprinkler on its pipe fitting. This will establish
a reference point for an increase or decrease adjustment to the right reversing point, which occurs at the
end of clockwise nozzle travel.
1.
Open water supply line to sprinkler. Turn nozzle by hand in same direction of current travel to reversing
point at end of arc. Immediately rotate nozzle in opposite direction to reversing point at other end of
arc. This procedure enables arc to be viewed without waiting for nozzle to traverse at normal speed.
CAUTION: Turning nozzle against current direction of travel may damage
sprinkler drive mechanism.
Figure 3
2.
Using a small screwdriver or Super 700 Nozzle Tool and Wrench, turn lock
pin 1/4 turn counterclockwise to align slot with “A” (adjust) on nozzle top. See
Figure 3.
SUPER
A
700
L
3
To Decrease arc: See Figure 4 and follow steps A - C on page 4.
To Increase arc: See Figure 5 and follow steps A - D on page 5.
3
| Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
|---|---|
| Tags | Toro Super 700 |
| Download File |
|
| Document Type | Installation Instructions |
| Language | English |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)