4.
Turn lock pin 1/4 turn clockwise to align slot with “L” on nozzle
top as shown in Figure 6.
Figure 6
SUPER
A
700
L
Spray Radius Adjustment
The Spray Radius Adjustment Screw is provided primarily to reduce
the radius (throw) of the spray without decreasing pressure to the
sprinkler. (Reduction exceeding 25% of radius is not recommended.)
In addition, it can also be used when the sprinkler is operated at low
pressure to slightly diffuse the spray, preventing a possible dry area
near the sprinkler.
Figure 7
L
A
0
07
SUPER
CAUTION: Adjustment screw can be swept into spray and lost if
turned excessively.
1.
Using a 1/16 in. hex wrench, turn adjustment screw inward
(clockwise) as required to reduce/diffuse spray as shown in
Figure 7.
Cleaning Sprinkler
(See Figures 8 - 11 to identify sprinkler parts)
S700, S700C and S700HP
1.
S700C and S700 HP Only: Using a 1/16" hex wrench, loosen
set screw on side of cap.
2.
Part Circle Models Only: To maintain correct arc alignment of
nozzle during reassembly, observe location of nozzle orifice
before disassembling sprinkler components
3.
4.
Unscrew cap from body (carefully to avoid changing body
alignment on pipe fitting). Remove sprinkler assembly from
body.
Pull basket screen and variable stator assembly from bottom of
riser assembly.
5.
6.
Flush screen and stator assembly thoroughly with clean water to remove all debris.
Reassemble parts in reverse order. Align keyways in sprinkler riser assembly with keys in body to
maintain correct radial location of nozzle. Tighten cap by hand only – do not overtighten.
7.
S700C and S700 HP Only: Tighten cap set screw.
S700S
1.
2.
3.
Unscrew sprinkler body assembly from cap (base).
Using small screwdriver, carefully pry screen and stator assembly from body assembly.
Flush parts thoroughly with clean water and reassemble in reverse order. Tighten body by hand only
–do not overtighten.
Note – Nozzle Replacement Part Numbers
All S700 sprinkler models manufactured after
December 1991 require a locking nozzle (desig-
nated by an “L” after the part number). For S700
sprinklers manufactured prior to December 1991,
omit the “L” from the part number when ordering.
Identify sprinkler versions as shown at right.
Square peg model requires “L” type nozzle.
Round
Square
Peg
Peg (with
or with-
out slot)
6
| Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
|---|---|
| Tags | Toro Super 700 |
| Download File |
|
| Document Type | Installation Instructions |
| Language | English |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)