Toro Wireless Rain Sensor Series Rain Sensor Model TWRS I Rain Freeze Sensor Sprinkler Irrigation Owners Manual

Installing the Sensor Module
1.
Adjust the sensor module to the preferred rainfall threshold activation point.
The settings, provided in metric on one side of the cap and U.S. standard on
the other, include 3mm, 6mm, 12mm and 19mm. The factory setting is 6mm
and is generally a good starting point. The 3mm setting is not recommended
for high humidity or foggy locations. To adjust, turn the cap to align the
stationary pin with the vertical slot. Guide the cap to the preferred slot
position, then turn it just enough to engage the pin.
Figure 11
2.
To install the sensor module on a rain
Figure 12
Figure 13
gutter, position the Quick Clip bracket
on the outer edge of the gutter and
secure by tightening the thumb screw
(Figure 12). Use the provided stainless
steel screws when installing the sensor
on a solid structure, such as a fence or
the side of a roof. See Figure 13.
Thumb
Screw
Note: For optimum signal strength,
the antenna wire should hang straight
down. Ensure the antenna is not in
contact with any metal objects .
11
Product Specification
CategoriesSprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals
Tags
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 28 pages
LanguageEnglish
Product BrandToro. Customer Service Representatives are available by phone: Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939
Document File TypePDF
Publishertoro.com
Wikipedia's PageToro Company
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website