CONTROLS LOCATION & OPERATION
NOTE: Determine the left and right sides of the
Note: Do not use the choke or the primer when
machine from normal operating position.
starting a warm engine.
4.
Start the engine by doing the following:
Operating Controls
For a recoil starter: Hold the snowthrower handle
with one hand and pull the recoil starter vigorously
with the other hand.
The snowthrower control panel contains a key switch, a
primer, a recoil starter, and an electric-start button
(electric-start model only). The choke lever and the
cord connection (for the electric-start model) are
located below the control panel as show in Figure 5.
For an electric starter:
A. Connect the power cord to the snowthrower
and to a standard household power outlet.
CAUTION
If you leave the snowthrower plugged into a
power outlet, someone can inadvertently start
the snowthrower and injure people or damage
property.
Unplug the power cord whenever you are not
starting the snowthrower.
B. Push the starter button.
Note: Run the electric starter no more than
ten times at intervals of five seconds on, then
five seconds off.
Figure 5
m-5067
(A) Key switch
(B) Primer
Important Running the electric starter extensively
can overheat and damage the starter.
(C) Electric-start button (electric-start model only)
(D) Recoil start
Note: If the engine does not start after this
series of attempts, wait at least 40 minutes to
allow the starter to cool before attempting to
start it again.
(E) Cord connection (electric-start model only;
underneath the control panel)
(F) Choke lever
5.
With the engine running, move the choke lever to
the left slowly.
Starting the Engine
Stopping the Engine
1.
2.
3.
Turn the key to the On position.
Move the choke lever to the right.
Turn the key to the Off position and wait for all moving
Cover the hole in the center of the primer with
your thumb and push the primer in twice, pausing
a moment between pushes. In extremely cold
temperatures, repeat this step if necessary.
parts to stop before leaving the operating position.
Note: Take off your glove when you push in the
primer so that air cannot escape from the primer
hole.
Snow Commander Service Manual
2 - 1
| Categories | Snow Blower Manuals, Toro Snow Blower |
|---|---|
| Tags | Toro 38600, Toro 38601, Toro 38602, Toro 38603, Toro Snow Commander |
| Model Year | 2006 |
| Download File |
|
| Document Type | Service Manual |
| Language | English, Français |
| Serial Number | 260010001 - 260999999 |
| Product Name | Toro Snow Commander Snowthrower |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Snow Blower |
| Product Type | Snowthrower |
| Product Series | Single Stage Snow Commander |
| Swath | 24 inch |
| Discharge | Single Stage |
| Engine Manufacturer | Briggs & Stratton |
| Engine Oil Type | 38602 |
| Engine Motor Model # | 084333-0199-E1 |
| Engine Motor Size | 141cc |
| Engine Motor Type | 2 Cycle EPA2 |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)