MAINTENANCE
4.
Remove the two self-tapping screws, three cap
screws, one washer, and three locknuts that
secure the drive belt cover to the snowthrower
frame (Figure 91). Set the drive belt cover aside.
6.
Remove the old drive belt from the engine pulley
and the idler pulley (Figure 92).
Figure 92
m-5063
Figure 91
m-5064
(A) Brake Arm Assembly (E) Belt Guides
(B) Idler Pulley
(C) Roller
(F) Rotor Pulley
(G) Left Rotor Guard
(A) Drive Belt Cover
(D) Snowthrower Frame
(E) Self-Tapping Screws
(B) Left Rotor Guard
(C) Washer (diamond-
shaped on some
models)
(D) Engine Pulley
7.
8.
9.
Push down on the idler pulley and remove the
drive belt from the rotor pulley (Figure 92).
5.
Remove the left rotor guard (Figure 91) and save
it for installation in step 10.
Push down on the idler pulley and route the new
drive belt around the rotor pulley (Figure 92).
Important The left rotor guard acts as a water seal
for the drive. Do not assemble the drive cover without
installing this part or the drive belt will slip and fail.
Release the idler pulley and route the drive belt
over the two belt guides, around the engine pulley,
and between the idler pulley and the roller (Figure
92).
Important The drive belt must be on top of the roller
and the two belt guides as shown in Figure 92.
10.
11.
Install the left rotor guard.
Install the drive belt cover. Tighten the fasteners
securely, but do not overtighten.
NOTE: Install the diamond-shaped washer as shown
in Figure 91 and Figure 93.
7 - 8
Snow Commander Service Manual
| Categories | Snow Blower Manuals, Toro Snow Blower |
|---|---|
| Tags | Toro 38600, Toro 38601, Toro 38602, Toro 38603, Toro Snow Commander |
| Model Year | 2006 |
| Download File |
|
| Document Type | Service Manual |
| Language | English, Français |
| Serial Number | 260010001 - 260999999 |
| Product Name | Toro Snow Commander Snowthrower |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Snow Blower |
| Product Type | Snowthrower |
| Product Series | Single Stage Snow Commander |
| Swath | 24 inch |
| Discharge | Single Stage |
| Engine Manufacturer | Briggs & Stratton |
| Engine Oil Type | 38602 |
| Engine Motor Model # | 084333-0199-E1 |
| Engine Motor Size | 141cc |
| Engine Motor Type | 2 Cycle EPA2 |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)