4.
Filling the Engine with Oil
6. Checking the Skids and
Scraper
Procedure
Procedure
Your snowthrower comes with 20 oz. (0.59 l) of oil in
the engine crankcase.
Refer to Checking and Adjusting the Skids and Scraper
in Maintenance.
Note: Before starting the engine, check the oil level
and add oil if necessary.
7.
Operation
Checking the Traction Drive
Max. fill: 20 oz. (0.59 l), type: automotive detergent oil
with an API service classification of SF, SG, SH, SJ, SL,
or higher. Use SAE 5W30 or SAE 10W30 oil. Refer to
your engine owner’s manual.
Procedure
1.
Remove the dipstick and slowly pour oil into the oil
fill tube to raise the oil level to the Full mark on the
dipstick. Do not overfill (Figure 12).
If the traction drive is not properly adjusted,
the snowthrower may move in the direction
opposite of what you intended, causing injury
and/or property damage.
Carefully check the traction drive and adjust it
properly, if necessary.
1.
2.
Start the engine; refer to Starting the Engine.
Move the speed selector to Position R1; refer to
Operating the Speed Selector.
3.
Squeeze the left hand (traction) lever to the hand-grip
(Figure 13).
Figure 12
2.
Install the dipstick securely.
Note: Do not spill oil around the oil fill tube; oil
could leak onto traction parts and cause the traction
to slip.
Figure 13
5.
Checking the Tire Pressure
The snowthrower should move rearward. If the
snowthrower does not move or moves forward,
complete the following:
Procedure
A. Release the traction lever and stop the engine.
The tires are overinflated at the factory for shipping.
Reduce the pressure equally in both tires to between 17
and 20 psi (116 and 137 kPa).
B. Disconnect the trunnion from the speed selector
lever (Figure 6).
C. Turn the trunnion downward (clockwise) on the
speed control rod (Figure 6).
D. Connect the trunnion to the speed selector lever
(Figure 6).
4.
Release the traction lever.
10
| Categories | Snow Blower Manuals, Toro Snow Blower |
|---|---|
| Tags | Toro 38629C, Toro Power Max 828OE |
| Model Number | 38629C |
| Model Year | 2008 |
| Download File |
|
| Document Type | Operator's Manual |
| Language | English |
| Serial Number | 280000001 - 280999999 |
| Product Name | Toro Power Max 826 OE Snowthrower |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Snow Blower |
| Product Type | Snowthrower |
| Product Series | Snowthrower, Two Stage Power Max |
| Swath | 26 inch |
| Discharge | Two Stage |
| Engine Manufacturer | Briggs & Stratton |
| Engine Oil Type | 20 oz. (.6l) 5w-30 or 10w-30 / API SH or higher |
| Gearbox Lubricant | 4.5 oz. (133ml) SAE 90 GL5 or higher |
| Engine Motor Model # | 15D1040112E1 |
| Engine Motor Size | 250cc |
| Engine Motor Type | 4 Cycle |
| Transmission Speed | 6 Forward/2 Reverse |
| Transmission Type | Friction Disc |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)