12.
13.
Align the tab on the choke control knob with the
slot on the upper snow hood.
Connect the choke control knob to the choke shaft
on the carburetor.
Adjusting the Discharge Chute
Latch
If the discharge chute does not lock into the desired
position or does not unlock so that you can move it to
another position, adjust the discharge chute latch.
Figure 48
1.
Discharge chute latch
2.
Gear teeth
1.
Remove the fastener on the gear cover (Figure 46),
lift the front of the cover up, and slide it back and
out of the way.
Note: The latch is spring loaded and will naturally
move into the teeth of the gear (Figure 48).
4.
Remove any slack in the cable by pulling the cable
conduit rearward.
5.
6.
Tighten the bolt on the cable clamp.
Install and secure the gear cover.
Replacing the Drive Belts
Figure 46
If the auger/impeller drive belt or the traction drive belt
becomes worn, oil-soaked, or otherwise damaged, go
to www.Toro.com for additional service information or
have an Authorized Service Dealer replace the belt.
2.
Loosen the bolt on the cable clamp (Figure 47).
Figure 47
1.
Cable conduit
2. Cable clamp
3.
Grasp the cable conduit and move it toward the front
of the machine until the discharge chute latch fully
engages the gear teeth (Figure 47 and Figure 48).
23
| Categories | Snow Blower Manuals, Toro Snow Blower |
|---|---|
| Tags | Toro 38629C, Toro Power Max 828OE |
| Model Number | 38629C |
| Model Year | 2008 |
| Download File |
|
| Document Type | Operator's Manual |
| Language | English |
| Serial Number | 280000001 - 280999999 |
| Product Name | Toro Power Max 826 OE Snowthrower |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Snow Blower |
| Product Type | Snowthrower |
| Product Series | Snowthrower, Two Stage Power Max |
| Swath | 26 inch |
| Discharge | Two Stage |
| Engine Manufacturer | Briggs & Stratton |
| Engine Oil Type | 20 oz. (.6l) 5w-30 or 10w-30 / API SH or higher |
| Gearbox Lubricant | 4.5 oz. (133ml) SAE 90 GL5 or higher |
| Engine Motor Model # | 15D1040112E1 |
| Engine Motor Size | 250cc |
| Engine Motor Type | 4 Cycle |
| Transmission Speed | 6 Forward/2 Reverse |
| Transmission Type | Friction Disc |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)