6.
Regulate the throttle as desired between
(FAST)
Pulling the Mower Rearward
and
(SLOW).
Your mower is equipped with free-wheeling clutches
which make it easier to pull the mower rearward. The
control bar must be lowered enough to disengage the
self-propel drive and disengage the clutches before pulling
the mower rearward. The mower may need to be pushed
forward one inch or more after control bar has been
released to disengage the self-propel drive and the
clutches.
Stopping the Engine
1.
Release the control bar.
The engine, blade, and traction drive will stop. See
your dealer immediately if they do not.
2.
3.
Stay behind the handle until all moving parts stop.
The self-propel cable should be properly adjusted so that
you can lower the control bar comfortably to stop the
traction drive, without stopping the engine. Refer to
Adjusting the Self-propelled Cable section in the
Maintenance chapter for cable adjustment information.
Pull the wire off of the spark plug and close the fuel
valve (Fig. 7) if the mower will be unattended or not
used.
Operating the Self-propel Drive
Adjusting the Cutting Height
The mower has three ground speeds: number 1 is slow, 2
is medium, and 3 is a fast walking pace.
The height of cut can be adjusted to five settings (Fig. 10).
For normal cutting, set all four wheels in the same
position.
1.
Move control bar to the RUN/SHIFT position (Fig. 9).
1
1
A = 1” (25 mm)
B = 1-1/2” (38 mm)
2
C = 2” (51 mm)
D = 2-1/2” (64 mm)
3
E = 3” (76 mm)
7
405
Figure 10
Figure 9
1.
Height-of-cut lever
1.
2.
RUN/DRIVE position
RUN/SHIFT position
3. STOP position
1.
2.
Stop the engine and wait for all moving parts to stop.
Pull the wire off of the spark plug (Fig. 6).
2.
3.
Move ground speed control to desired setting.
To engage the self-propel drive, squeeze the control
bar against the handle in the RUN/DRIVE position
(Fig. 9).
DANGER
Note: Do not shift speeds while the control bar is
squeezed against handle in the RUN/DRIVE position
(Fig. 9); the transmission could be damaged. Move the
control bar to the RUN/SHIFT position when changing
ground speed.
POTENTIAL HAZARD
•
Adjusting height-of-cut levers could bring
hands into contact with the moving blade.
WHAT CAN HAPPEN
•
Contact with the rotating blade can cause
serious injury.
Ground speed can be varied by increasing or decreasing
the distance between the control bar and handle. Lower
the control bar to slow down when making a turn or if the
mower is moving too fast for you. If you lower the control
bar too far, the mower will stop self-propelling. When the
control bar is tight against the handle, the mower will
self-propel at the maximum ground speed set by the
ground speed control.
HOW TO AVOID THE HAZARD
•
Stop the engine and wait for all moving parts to
stop before changing the height-of-cut.
Do not put your fingers under the housing to
lift the mower when adjusting the height-of-cut
levers.
•
Move the ground speed control to N (NEUTRAL) when
using the mower for trimming and whenever leaving
mower.
3.
For easier adjustment, lift the housing up so the wheel
is off the ground. Do not place your hands under the
deck when lifting the housing.
8
| Categories | Lawn Mower Manual, Toro Lawn Mower Manual |
|---|---|
| Tags | Toro 20044, Toro SR 21OS |
| Model Number | 20044 |
| Model Year | 1999 |
| Download File |
|
| Document Type | Operator's Manual |
| Language | English |
| Serial Number | 99000001 - 99999999 |
| Product Name | Super Recycler Mower, SR-21OS |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
| Product Type | Walk Behind Mower |
| Swath | 21 inch |
| Discharge | Recycler |
| Engine Manufacturer | Kawasaki |
| Engine Oil Type | 18.5 oz. (.55l) 30w or 10w-30 / API SH or higher |
| Gearbox Lubricant | 3 oz. (92gm) #2 Lithium grease |
| Engine Motor Model # | FC150V-ES28 |
| Engine Motor Size | 5.5 hp |
| Engine Motor Type | 4 Cycle CARB1, EPA1 |
| Transmission Speed | 3 Speed |
| Transmission Type | Gear |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)