Toro 824 1028 Power Shift 38542 and 38558 Snow Blower Operators Manual, 1999

storage seasons. Toro Stabilizer/Conditioner cleans
the engine during operation and prevents gum–like
varnish deposits from forming in the engine during
periods of storage.
Speed Shift Control (Fig. 13)—The control has a
neutral position, four speeds forward and two reverse,
and also controls power shifting of wheels. To select
speeds, move shift control to desired position.
Note:
A fuel stabilizer/conditioner is most
effective when mixed with fresh
gasoline.
Note:
Before shifting gears into or out of
reverse or when using the Power Shift
feature, the traction drive control must
be released. On-the-go shifting may be
accomplished with any of the
DO NOT USE FUEL ADDITIVES OTHER
THAN THOSE MANUFACTURED FOR FUEL
STABILIZATION DURING STORAGE SUCH
AS TORO’S STABILIZER/CONDITIONER OR
A SIMILAR PRODUCT. TORO’S
FORWARD speeds without releasing
the traction drive control.
Auger/impeller Lock–Up (Fig. 13)—When the
auger/impeller control and traction drive control are
both compressed, the traction control locks the
auger/impeller control down. Releasing the traction
control releases the auger/impeller control.
STABILIZER/CONDITIONER IS A
PETROLEUM DISTILLATE BASED
CONDITIONER/STABILIZER. TORO DOES
NOT RECOMMEND STABILIZERS WITH AN
ALCOHOL BASE SUCH AS ETHANOL,
METHANOL OR ISOPROPYL. ADDITIVES
SHOULD NOT BE USED TO TRY TO
ENHANCE THE POWER OR PERFORMANCE
OF MACHINE.
Discharge Chute Control (Fig. 13)—Rotate
discharge chute control clockwise to move discharge
chute to the right and counterclockwise to move chute
to the left.
Ignition Switch (Fig. 14)—Insert key before starting
engine with the recoil starter. To stop engine, remove
key.
1.
Clean area around the fuel tank cap (Fig. 12).
Remove cap from fuel tank. Using unleaded,
regular gasoline, fill tank to within 1/4” to 1/2”
(6
the filler neck. This space is for expansion of
fuel. Do not fill tank full. Reinstall fuel tank cap.
to 13 mm) from the top of the tank, not into
Throttle (Fig. 14)—Move throttle upward to increase
the engine speed.
Choke (Fig. 14)—Rotate choke to ON position to
start a cold engine. As engine warms up, rotate choke
gradually to OFF.
Fuel tank capacity is 4 quarts.
Operation
Primer (Fig. 14)—Press primer to pump a small
amount of gasoline into engine for improved cold
weather starting.
Controls
Fuel Shut–Off Valve (Fig. 15)—Valve is located
under fuel tank. Close valve to stop fuel flow from
fuel tank and open valve to allow fuel to flow to the
carburetor. Close valve when snowthrower is not
used.
Auger/Impeller Control (Fig. 13)—Control has two
positions: ENGAGE and DISENGAGE. To engage
both auger and impeller, compress lever against right
handle grip. To disengage, release lever.
Traction Drive Control (Fig. 13)—To engage
traction (wheel drive) or activate power shift system,
lever must be compressed against left handle grip. To
stop traction, release lever.
Deflector Handle (Fig. 16)—Deflector handle on top
of discharge chute is used to control the height of the
snow stream.
Recoil Starter (Fig. 17)—Recoil starter is on back
side of engine. Pull recoil starter to start engine.
11
Product Specification
CategoriesSnow Blower Manuals, Toro Snow Blower
Tags, , ,
Model Number38542 and 38558
Model Year1999
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 32 pages
Document TypeOperator's Manual
LanguageEnglish
Serial Number99000001 - 99999999
Product NameToro 824 1028 Power Shift Snowthrower
Product BrandToro. Customer Service Representatives are available by phone: Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Snow Blower
Product TypeSnowthrower
Product SeriesSnowthrower, Two Stage Power Shift
Swath24 inch
DischargeTwo Stage
Engine ManufacturerTecumseh
Engine Oil Type26 oz. (.8l) 5w-30 or 10w / API SH or higher
Engine Motor Model #4.5 oz. (133ml) SAE 90 GL5 or higher
Engine Motor Size8 hp
Engine Motor Type4 Cycle CARB1, EPA1
Transmission Speed4 Forward/2 Reverse
Transmission TypeGear
Document File TypePDF
Publishertoro.com
Wikipedia's PageToro Company
CopyrightAttribution Non-commercial
(2 votes, average: 4.5 out of 5)
Lawn and Garden readers have rated Toro 824 1028 Power Shift 38542 and 38558 Snow Blower Operators Manual, 1999 4.5 out of 5.0 based on 2 product reviews.
Submit your review (optional)
(will not be displayed)
* Required Field

Toro 824 1028 Power Shift 38542 and 38558 Snow Blower Operators Manual, 1999 SKU UPC Model
Sören Fritiofsson on Jan 10, 2016. soren f on jan 10 2016

I have some problem not to drive without choke its running with smaller capacity


Ola f on Jan 12, 2015.

Stable but dont throw the snow long enough


Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website