Toro CCR 3650 GTS 38439 Snow Blower Operators Manual, 2000

Throwing Snow
2
3
1
WARNING
POTENTIAL HAZARD
Stones, toys and other foreign objects may be
picked up and thrown by the rotor blades.
WHAT CAN HAPPEN
Thrown objects can cause serious personal
injury to operator or bystanders.
m-3278
HOW TO AVOID THE HAZARD
Keep the area to be cleared free of all objects
that could be picked up and thrown by rotor
blades.
Figure 11
1.
2.
Chute handle
3.
Deflector mounting
locknuts
Chute deflector handle
•   Keep all children and pets away from area of
operation.
IMPORTANT: Do not use the chute handle to lift the
snowthrower.  This can damage the chute handle.
The snowthrower clears down to the ground and
propels itself forward when you raise the handle.  The
snowthrower tilts slightly forward so that rotor blades
strike the ground. The wheels do not need to touch the
ground to self-propel. The more you tilt the handle
forward, the faster the snowthrower self-propels.
Models 38439, 38440, and 38445 only
Rotate the chute crank clockwise to move the discharge
chute to the right or counterclockwise to move the chute
to the left (Fig. 12). The chute deflector handle on top of
the discharge chute controls the height of the snow stream.
Do not overtighten the chute deflector mounting
locknuts.
Always overlap each swath and discharge the snow
downwind whenever possible.
To clear snow from crushed rock or gravel, push down
on the handle to raise the rotor blades clear of the
loose material and push the snowthrower forward.
1
2
In snowy and cold conditions, some controls and
moving parts may freeze solid. Do not use excessive
force when trying to operate frozen controls. If you
have difficulty operating any control or part, start the
engine and let it run for a few minutes.
3
After clearing the snow, let the engine run for a few
minutes to prevent moving parts from freezing. Shut
off the engine and remove all ice and snow from the
snowthrower. On models 38439, 38440, and 38445:
Operate the chute crank several times to remove any
ice and snow.
629
Figure 12
1.
2.
Chute crank
3.
Deflector mounting
locknuts
Chute deflector handle
11
Product Specification
CategoriesSnow Blower Manuals, Toro Snow Blower
Tags,
Model Number38439
Model Year2000
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 20 pages
Document TypeOperator's Manual
LanguageEnglish
Serial Number200000001 - 200003006
Product NameToro CCR 3650 Snowthrower
Product BrandToro. Customer Service Representatives are available by phone: Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Snow Blower
Product TypeSnowthrower
Product SeriesCCR 2000/3000/3600, Snowthrower
Swath20 inch
DischargeSingle Stage
Engine ManufacturerToro
Engine Oil TypeToro 2 cycle / NMMA-TCW3
Engine Motor Model #R-tek
Engine Motor Size6 hp
Engine Motor Type2 Cycle EPA1
Document File TypePDF
Publishertoro.com
Wikipedia's PageToro Company
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website