Installing the Chute Crank
Models 38439, 38440, and 38445 only
1
1.
Insert the flattened end of the chute crank through the
hole in the shroud while aligning the mounting bracket
with the holes in the lower handle (Fig. 4).
2
4
1
5
893
3
M-4522
Figure 5
635
1.
Upper handle
Figure 4
1.
2.
3.
Chute crank
4.
5.
Plastic bushing
Mounting bracket
Gear
Hidden gear opening
Note: Ensure that the cable guide is in the position as
shown in Figure 6.
2.
Slowly rotate the crank until the flattened end fits into
the hidden gear opening and the chute ring turns with
the crank (Fig. 4).
3.
4.
Fully insert the plastic bushing into the hole in the
mounting bracket (Fig. 4).
1
2
Secure the mounting bracket to the handle with two
capscrews and locknuts (Fig. 4).
3
M-4523
Unfolding the Handle
Figure 6
1.
2.
Knob
3. Cable guide
1.
2.
Cut the tie that secures the control cable to the handle.
Handle lock
Loosen the knobs and pull out the handle locks until
the upper handle rotates freely (Fig. 6).
4.
Insert the loose end of the control cable into the top
hole of the control bar as illustrated in Figure 7
(models 38413 and 38419) or into the bottom hole as
illustrated in Figure 8 (models 38439, 38440, and
38445).
3.
Position the upper handle as shown in Figure 5.
7
| Categories | Snow Blower Manuals, Toro Snow Blower |
|---|---|
| Tags | Toro 38439, Toro CCR 3650 |
| Model Number | 38439 |
| Model Year | 2000 |
| Download File |
|
| Document Type | Operator's Manual |
| Language | English |
| Serial Number | 200000001 - 200003006 |
| Product Name | Toro CCR 3650 Snowthrower |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Snow Blower |
| Product Type | Snowthrower |
| Product Series | CCR 2000/3000/3600, Snowthrower |
| Swath | 20 inch |
| Discharge | Single Stage |
| Engine Manufacturer | Toro |
| Engine Oil Type | Toro 2 cycle / NMMA-TCW3 |
| Engine Motor Model # | R-tek |
| Engine Motor Size | 6 hp |
| Engine Motor Type | 2 Cycle EPA1 |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)