4
6
1
7
5
4
3
8
2
680
Figure 23
1.
2.
Rotor blade
Rotor half
3.
4.
Torx screw
Locknut
5.
6.
Hex-head capscrew
Spacer
7.
8.
Auger shaft assembly
Hex-head screw
Installing a New Blade
2. Insert the new rotor blade between the rotor halves.
3.
Secure the rotor blade to the rotor halves with two
hex-head capscrews, two spacers, and two locknuts,
positioning the bolt heads on the thick side of the
blade (Fig. 23).
1.
Examine a new rotor blade edge for the difference in
layer thickness (Fig. 24). Some rotor blades have a
part number on the thick side of the blade.
4.
5.
Curve the rotor blade and secure it with the remaining
torx screws and locknuts, positioning the screw heads
on the thick side of the blade (Fig. 23).
Tighten all screws and locknuts securely.
Storage
3
1
Preparing the Fuel System
2
681
1.
Add a fuel stabilizer/conditioner to the gasoline in the
fuel tank as directed.
Figure 24
1.
2.
Thin layer
3.
Wear indicator hole
Note: A fuel stabilizer/conditioner works best when you
mix it with fresh gasoline.
Thick layer
Note: If you use Toro Heavy Duty 50:1 All Season 2-Cycle
Engine Oil with Fuel Stabilizer, you do not need to add a
fuel stabilizer/conditioner.
Install the rotor blades with the thick layer on the
inside of the curve. (Fig. 24). If you do not install the
blades properly, the blades may be out of balance and
cause the snowthrower to “hop” or “bounce.”
16
| Categories | Snow Blower Manuals, Toro Snow Blower |
|---|---|
| Tags | Toro 38439, Toro CCR 3650 |
| Model Number | 38439 |
| Model Year | 2000 |
| Download File |
|
| Document Type | Operator's Manual |
| Language | English |
| Serial Number | 200000001 - 200003006 |
| Product Name | Toro CCR 3650 Snowthrower |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Snow Blower |
| Product Type | Snowthrower |
| Product Series | CCR 2000/3000/3600, Snowthrower |
| Swath | 20 inch |
| Discharge | Single Stage |
| Engine Manufacturer | Toro |
| Engine Oil Type | Toro 2 cycle / NMMA-TCW3 |
| Engine Motor Model # | R-tek |
| Engine Motor Size | 6 hp |
| Engine Motor Type | 2 Cycle EPA1 |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)