4
Installing the Blade
5
1.
Position the blade onto the spindle and blade driver,
with the curved blade tips pointing toward the mower
and the blade driver nesting in the recess of the blade
(Fig. 24).
3
2.
3.
Install the accelerator, lock washer, and blade bolt
(Fig. 24).
2
1
1627
Tighten the blade bolt to 50 ft-lb (68 Nm).
Figure 24
1.
2.
3.
Blade bolt
4.
5.
Blade
WARNING
Lock washer
Accelerator
Blade driver
POTENTIAL HAZARD
•
Operating the mower without the accelerator in
place could cause the blade to flex, bend, or
break.
Sharpening the Blade
Using a file, sharpen top side of the blade and maintain
the original cutting angle (Fig. 25).
WHAT CAN HAPPEN
• A broken blade could cause serious injury or
death to the operator or bystanders.
1
HOW TO AVOID THE HAZARD
•
Do not operate the mower without the
accelerator.
153
Figure 25
1.
Sharpen at this angle only
Lubricating the Self–propel
Drive
Note: The blade will remain balanced if same amount of
material is removed from both cutting edges.
Self-propelled Models Only
1.
Wipe the grease fittings on the rear height-of-cut
adjustors (Fig. 27) with a clean rag.
Balancing the Blade
1.
Check the balance of the blade by placing the center
hole of the blade over a nail or screwdriver shank
clamped horizontally in a vise (Fig. 26).
Note: You can also check the balance using a
commercially manufactured, blade balancer.
1
276
Figure 27
1.
Grease fitting
1007
Figure 26
2.
Install a grease gun onto each fitting in turn and gently
apply one or two pumps of #2 multi-purpose lithium
grease to each.
2.
If either end of the blade rotates downward, file that
end (not the cutting edge or the end near the cutting
edge). The blade is properly balanced when neither
end drops.
IMPORTANT: Excess grease may damage seals and
prevent proper wheel clutch operation.
15
| Categories | Lawn Mower Manual, Toro Lawn Mower Manual |
|---|---|
| Tags | Toro 20030, Toro 20042, Toro 20043, Toro 20045, Toro SR 21S |
| Model Number | 20030, 20042, 20043, 20045 |
| Model Year | 2001 |
| Download File |
|
| Document Type | Operator's Manual |
| Language | English |
| Serial Number | 210000001 - 210999999 |
| Product Name | Toro Super Recycler Mower, SR-21P |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
| Product Type | Walk Behind Mower |
| Product Series | Toro 21" (53cm) 3 in 1 / Recycler |
| Swath | 21 inch |
| Discharge | Recycler |
| Engine Manufacturer | Briggs & Stratton |
| Engine Oil Type | 20 oz. (.6l) 30w or 10w-30 / API SH or higher |
| Engine Motor Size | 6 hp |
| Transmission Type | Hand Push |
| Spark Plug | Champion RJ19LM |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(7 votes, average: 4.86 out of 5)
Lawn and Garden readers have rated Toro 20030 20042 20043 20045 21-Inch Super Recycler SR 21S Lawn Mower Operators Manual, 2001 4.9 out of 5.0 based on 7 product reviews. Just bought a used 20042. Works fantastic! One pull and it's running! Self propelled unit that works perfectly!!!
Needs a full service and it's on duty.
Thank you!
Website set up very nice/ Easyto use
Website very well set up. It is easy to use.
Web site very well set up. Easy to use.
Website very well set up. Easy to follow.
The website is very well setup.
This is great