Before Starting
Installing the Discharge Tunnel
Model 20043 Only
Oil
Before operating the mower, you must install the
discharge tunnel; refer to Installing the Discharge Tunnel,
page 19. Note that no discharge plate has been shipped
with model 20043; and therefore you do not need to
remove it when installing the discharge tunnel.
Initially, the crankcase must be filled with 20 ounces
(0.6 liters) of SAE 30 oil; 10W-30 oil may be substituted
if SAE 30 is not available. Use any high quality detergent
oil having the American Petroleum Institute (API)
“service classification”—SF, SG, SH or SJ.
DANGER
Before each use, ensure that the oil level is between the
FULL and ADD marks on the dipstick (Fig. 7). Add oil if
the level is low.
POTENTIAL HAZARD
•
If the mower is operated without the discharge
tunnel or discharge plate fastened in place,
blade contact could occur or objects could be
thrown.
1.
Position the mower on a level surface and clean
around the dipstick (Fig. 7).
2.
Remove the dipstick by rotating the cap
counterclockwise 1/4 turn.
WHAT CAN HAPPEN
•
The moving blade can cut of hands and feet,
and thrown objects can cause serious personal
injury or death.
3.
4.
Wipe the dipstick clean.
Insert the dipstick into the filler neck and rotate the
cap clockwise 1/4 turn.
HOW TO AVOID THE HAZARD
•
Ensure that either the discharge tunnel or a
discharge plate is installed on the mower.
When using a mower with a discharge tunnel,
always ensure that either the grass bag is
installed or the discharge door is closed.
5.
Remove the dipstick and check the level of the oil on
the side of the dipstick with the FULL and ADD marks
(Fig. 7).
1
Installing the Battery
Electric Start Models Only
1.
Remove the battery from the packaging material and
charge it; refer to Charging the Battery, page 16.
1626
Figure 7
2.
Align the pins in the battery case with the holes in the
lower handle and lower the pins into the holes until the
battery case snaps into place (Fig. 6).
1.
Dipstick
6.
If the level is low, add enough oil to raise the level to
the FULL mark on the dipstick.
3.
Connect the wire lead from the battery to the wire lead
from the electrical wire harness in the corrugated tube
(Fig. 6).
IMPORTANT: Do not fill above the FULL mark
because the engine could be damaged when started.
Pour the oil slowly.
1
3
4
2
m–4253
Figure 6
1.
2.
Battery case
Lower handle
3.
4.
Wire lead from battery
Wire lead from harness
7
Categories | Lawn Mower Manual, Toro Lawn Mower Manual |
---|---|
Tags | Toro 20030, Toro 20042, Toro 20043, Toro 20045, Toro SR 21S |
Model Number | 20030, 20042, 20043, 20045 |
Model Year | 2001 |
Download File |
|
Document Type | Operator's Manual |
Language | English |
Serial Number | 210000001 - 210999999 |
Product Name | Toro Super Recycler Mower, SR-21P |
Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
Product Type | Walk Behind Mower |
Product Series | Toro 21" (53cm) 3 in 1 / Recycler |
Swath | 21 inch |
Discharge | Recycler |
Engine Manufacturer | Briggs & Stratton |
Engine Oil Type | 20 oz. (.6l) 30w or 10w-30 / API SH or higher |
Engine Motor Size | 6 hp |
Transmission Type | Hand Push |
Spark Plug | Champion RJ19LM |
Document File Type | |
Publisher | toro.com |
Wikipedia's Page | Toro Company |
Copyright | Attribution Non-commercial |
(7 votes, average: 4.86 out of 5) Lawn and Garden readers have rated Toro 20030 20042 20043 20045 21-Inch Super Recycler SR 21S Lawn Mower Operators Manual, 2001 4.9 out of 5.0 based on 7 product reviews.
Just bought a used 20042. Works fantastic! One pull and it's running! Self propelled unit that works perfectly!!!
Needs a full service and it's on duty.
Thank you!
Website set up very nice/ Easyto use
Website very well set up. It is easy to use.
Web site very well set up. Easy to use.
Website very well set up. Easy to follow.
The website is very well setup.
This is great