Adjusting the Discharge Chute
Caution
Models 38515 and 38516
If you leave the snowthrower plugged into a power
outlet, someone can inadvertently start the
snowthrower and injure people or damage
property.
Move the chute handle left and right to adjust the direction
of the snow stream (Fig. 14). The chute deflector handle on
top of the discharge chute controls the height of the snow
stream.
Unplug the power cord whenever you are not
starting the snowthrower.
1
B. Push the starter button.
Note: Run the electric starter no more than 10 times at
intervals of 5 seconds on, then 5 seconds off.
3
2
Important
Running the electric starter extensively can
overheat and damage it.
Note: If the engine does not start after this series of
attempts, wait at least 40 minutes to allow the starter to
cool before attempting to start it again.
mĆ5524
Figure 14
Note: If the engine does not start after the second series
of attempts, take the snowthrower to an Authorized
Service Dealer for service.
1.
2.
Chute deflector handle
3. Chute handle
Deflector mounting
locknut (2)
C. When the engine starts, disconnect the power cord
from the snowthrower and the outlet.
Note: Do not overtighten the chute deflector mounting
locknuts.
5.
With the engine running, move the choke lever to the
left slowly.
Important
Do not use the chute handle to lift the
Stopping the Engine
snowthrower. This can damage the chute handle.
Turn the key to the Off position and wait for all moving
parts to stop before leaving the operating position.
Models 38517 and 38518
Rotate the chute crank clockwise to move the discharge
chute to the right or counterclockwise to move the chute to
the left (Fig. 15). The chute deflector handle on top of the
discharge chute controls the height of the snow stream.
Starting the Rotor Blades
To start the rotor blades, squeeze the control bar and the
handle together.
Stopping the Rotor Blades
To stop the rotor blades, release the control bar.
Note: When you release the control bar, the rotor blades
stop, but the engine continues to run.
13
| Categories | Snow Blower Manuals, Toro Snow Blower |
|---|---|
| Tags | Toro 38515, Toro CCR 2450 |
| Model Number | 38515 |
| Model Year | 2002 |
| Download File |
|
| Document Type | Operator's Manual |
| Language | English |
| Serial Number | 220000001 - 220999999 |
| Product Name | Toro CCR 2450 3650 GTS Snowthrower |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Snow Blower |
| Product Type | Snowthrower |
| Product Series | CCR 1000/2400/2500, Single Stage, Snowthrower |
| Swath | 20 inch |
| Discharge | Single Stage |
| Engine Manufacturer | Toro |
| Engine Oil Type | Toro 2 cycle / NMMA-TCW3 |
| Engine Motor Model # | R-tek |
| Engine Motor Size | 5 hp |
| Engine Motor Type | 2 Cycle EPA1 |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(2 votes, average: 3.5 out of 5)
Lawn and Garden readers have rated Toro CCR 2450 GTS 38515 Snow Blower Operators Manual, 2002 3.5 out of 5.0 based on 2 product reviews. i am looking for a manual for model #38518 serial #260000163
ccr 2450 141cc 20'' i did not get one with this blower i need a parts manual so i can order parts when i need them
thankyou
edward bowtle
129 parkwood cresent
charlottetown
pei c1a7a4
It was great until it suddenly stopped working.