•
Stop the engine whenever you leave the operating
position, before unclogging the discharge chute, and
when making any repairs, adjustments, or inspections.
•
•
Rotating rotor blades can injure fingers or hands. Stay
behind the handles and away from the discharge
opening while operating the snowthrower. Keep your
face, hands, feet, and any other part of your body or
clothing away from moving or rotating parts.
•
•
When cleaning, repairing, or inspecting, make certain
that the rotor blades and all moving parts have stopped.
Before adjusting, cleaning, repairing, and inspecting the
snowthrower, and before unclogging the discharge
chute, stop the engine, remove the key, and wait for all
moving parts to stop.
Do not run the engine indoors, except when starting it
and for moving the snowthrower in or out of the
building. Open the outside doors; exhaust fumes are
dangerous.
•
•
•
•
Use a stick, not your hands, to remove obstructions
from the discharge chute.
•
Do not clear snow across the face of slopes. Exercise
extreme caution when changing direction on slopes. Do
not attempt to clear steep slopes.
Before leaving the operating position, stop the engine,
remove the key, and wait for all moving parts to stop.
•
•
Never operate the snowthrower without proper guards,
plates, or other safety protective devices in place.
Do not wear loose-fitting clothing that could get caught
in moving parts.
Never operate the snowthrower near glass enclosures,
automobiles, window wells, and drop-offs without
properly adjusting the snow discharge angle. Keep
children and pets away.
If a shield, safety device, or decal is damaged, illegible,
or lost, repair or replace it before beginning operation.
Also, tighten any loose fasteners.
•
•
•
•
Do not overload the machine capacity by attempting to
clear snow at too fast a rate.
•
•
•
Do not smoke while handling gasoline.
Do not use the snowthrower on a roof.
Look behind and use care when backing up with the
snowthrower.
Do not touch the engine while it is running or soon after
it has stopped because the engine may be hot enough to
cause a burn.
Never direct the discharge at bystanders or allow
anyone in front of the unit.
•
Perform only those maintenance instructions described
in this manual. Before performing any maintenance,
service, or adjustment, stop the engine, remove the key,
and disconnect the wire from the spark plug. If major
repairs are ever needed, contact your Authorized
Service Dealer.
Never operate the snowthrower without good visibility
or light. Always be sure of your footing, and keep a
firm hold on the handle. Walk; never run.
Maintenance and Storage
•
•
Do not change the governor settings on the engine.
•
Check all fasteners at frequent intervals for proper
tightness to be sure that the equipment is in safe
working condition.
When storing the snowthrower for more than 30 days,
drain the fuel from the fuel tank to prevent a potential
hazard. Store fuel in an approved fuel container.
Remove the key from the ignition switch before storing
the snowthrower.
•
Never store the machine with fuel in the fuel tank inside
a building where ignition sources are present, such as
hot water and space heaters and clothes dryers. Allow
the engine to cool before storing in any enclosure.
•
To ensure the best performance and safety, purchase
only genuine Toro replacement parts and accessories.
•
•
Always refer to this operator’s manual for important
details if the snowthrower is to be stored for an
extended period.
Maintain or replace safety and instruction labels when
necessary.
Toro Snowthrower Safety
The following list contains safety information specific to
Toro products or other safety information that you must
know.
4
| Categories | Snow Blower Manuals, Toro Snow Blower |
|---|---|
| Tags | Toro 38515, Toro CCR 2450 |
| Model Number | 38515 |
| Model Year | 2002 |
| Download File |
|
| Document Type | Operator's Manual |
| Language | English |
| Serial Number | 220000001 - 220999999 |
| Product Name | Toro CCR 2450 3650 GTS Snowthrower |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Snow Blower |
| Product Type | Snowthrower |
| Product Series | CCR 1000/2400/2500, Single Stage, Snowthrower |
| Swath | 20 inch |
| Discharge | Single Stage |
| Engine Manufacturer | Toro |
| Engine Oil Type | Toro 2 cycle / NMMA-TCW3 |
| Engine Motor Model # | R-tek |
| Engine Motor Size | 5 hp |
| Engine Motor Type | 2 Cycle EPA1 |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(2 votes, average: 3.5 out of 5)
Lawn and Garden readers have rated Toro CCR 2450 GTS 38515 Snow Blower Operators Manual, 2002 3.5 out of 5.0 based on 2 product reviews. i am looking for a manual for model #38518 serial #260000163
ccr 2450 141cc 20'' i did not get one with this blower i need a parts manual so i can order parts when i need them
thankyou
edward bowtle
129 parkwood cresent
charlottetown
pei c1a7a4
It was great until it suddenly stopped working.