5.
Pull up on the idler pulley and remove the old drive belt
from the rotor pulley, the brake arm assembly, and the
engine pulley (Fig. 28).
1
2
m-3215
1
Figure 26
1.
0.030 in. (0.76 mm)
4
10.
Install the sparkplug by hand and then torque it to
15
ft-lb (20.4 N m). If you do not have a torque wrench,
6
tighten the plug firmly.
11.
12.
13.
Connect the wire to the spark plug.
Install the control panel.
Insert the key in the switch.
3
Replacing the Drive Belt
5
626
Figure 28
Inspect the drive belt before each season, and replace it if it
is worn or damaged.
1.
2.
3.
Engine pulley
Idler pulley
Roller
4.
5.
6.
Brake arm assembly
Rotor pulley
1.
2.
3.
Stop the engine and wait for all moving parts to stop.
Remove the key from the switch.
Belt guide
Disconnect the wire from the spark plug. Refer to steps
6. Loop the new drive belt around the engine pulley, under
the idler pulley, over the roller, through the brake
assembly, and around the rotor pulley (Fig. 28).
3
through 5 of Replacing the Spark Plug on page 19.
4.
Remove the fasteners that secure the drive belt cover to
the snowthrower frame (Fig. 27). Set the drive belt
cover aside.
Important
shown in Figure 28.
The drive belt must be on top of the roller as
7.
Install the drive belt cover. Tighten the fasteners
securely, but do not overtighten.
3
8.
Connect the wire to the spark plug.
Install the control panel.
9.
2
10.
Insert the key in the switch.
6
Emptying the Fuel Tank
1.
2.
Stop the engine and wait for all moving parts to stop.
Remove the key from the switch.
5
1
m-5534
4
Figure 27
1.
Drive belt cover
Nut (2)
4.
Short self-tapping
screw (2)
2.
3.
5.
6.
Long self-tapping screw
Bolt (2)
Washer
20
| Categories | Snow Blower Manuals, Toro Snow Blower |
|---|---|
| Tags | Toro 38515, Toro CCR 2450 |
| Model Number | 38515 |
| Model Year | 2002 |
| Download File |
|
| Document Type | Operator's Manual |
| Language | English |
| Serial Number | 220000001 - 220999999 |
| Product Name | Toro CCR 2450 3650 GTS Snowthrower |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Snow Blower |
| Product Type | Snowthrower |
| Product Series | CCR 1000/2400/2500, Single Stage, Snowthrower |
| Swath | 20 inch |
| Discharge | Single Stage |
| Engine Manufacturer | Toro |
| Engine Oil Type | Toro 2 cycle / NMMA-TCW3 |
| Engine Motor Model # | R-tek |
| Engine Motor Size | 5 hp |
| Engine Motor Type | 2 Cycle EPA1 |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(2 votes, average: 3.5 out of 5)
Lawn and Garden readers have rated Toro CCR 2450 GTS 38515 Snow Blower Operators Manual, 2002 3.5 out of 5.0 based on 2 product reviews. i am looking for a manual for model #38518 serial #260000163
ccr 2450 141cc 20'' i did not get one with this blower i need a parts manual so i can order parts when i need them
thankyou
edward bowtle
129 parkwood cresent
charlottetown
pei c1a7a4
It was great until it suddenly stopped working.