Toro CCR 2450 GTS 38516 Snow Blower Operators Manual, 2002

5.
Pull up on the idler pulley and remove the old drive belt
from the rotor pulley, the brake arm assembly, and the
engine pulley (Fig. 28).
1
2
m-3215
1
Figure 26
1.
0.030 in. (0.76 mm)
4
10.
Install the sparkplug by hand and then torque it to
15
ft-lb (20.4 N m). If you do not have a torque wrench,
6
tighten the plug firmly.
11.
12.
13.
Connect the wire to the spark plug.
Install the control panel.
Insert the key in the switch.
3
Replacing the Drive Belt
5
626
Figure 28
Inspect the drive belt before each season, and replace it if it
is worn or damaged.
1.
2.
3.
Engine pulley
Idler pulley
Roller
4.
5.
6.
Brake arm assembly
Rotor pulley
1.
2.
3.
Stop the engine and wait for all moving parts to stop.
Remove the key from the switch.
Belt guide
Disconnect the wire from the spark plug. Refer to steps
6.   Loop the new drive belt around the engine pulley, under
the idler pulley, over the roller, through the brake
assembly, and around the rotor pulley (Fig. 28).
3
through 5 of Replacing the Spark Plug on page 19.
4.
Remove the fasteners that secure the drive belt cover to
the snowthrower frame (Fig. 27). Set the drive belt
cover aside.
Important
shown in Figure 28.
The drive belt must be on top of the roller as
7.
Install the drive belt cover. Tighten the fasteners
securely, but do not overtighten.
3
8.
Connect the wire to the spark plug.
Install the control panel.
9.
2
10.
Insert the key in the switch.
6
Emptying the Fuel Tank
1.
2.
Stop the engine and wait for all moving parts to stop.
Remove the key from the switch.
5
1
m-5534
4
Figure 27
1.
Drive belt cover
Nut (2)
4.
Short self-tapping
screw (2)
2.
3.
5.
6.
Long self-tapping screw
Bolt (2)
Washer
20
Product Specification
CategoriesSnow Blower Manuals, Toro Snow Blower
Tags,
Model Number38516
Model Year2002
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 28 pages
Document TypeOperator's Manual
LanguageEnglish
Serial Number220000001 - 220999999
Product NameToro CCR 2450 GTS Snowthrower
Product BrandToro. Customer Service Representatives are available by phone: Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Snow Blower
Product TypeSnowthrower
Product SeriesCCR 1000/2400/2500, Single Stage, Snowthrower
Swath20 inch
DischargeSingle Stage
Engine ManufacturerToro
Engine Oil TypeToro 2 cycle / NMMA-TCW3
Engine Motor Model #R-tek
Engine Motor Size5 hp
Engine Motor Type2 Cycle EPA1
Document File TypePDF
Publishertoro.com
Wikipedia's PageToro Company
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website